Is there a way to go back to flash bios?

mike2k1

Noob Account
Feb 3, 2006
6
0
palmdale
I wanted to know if there was a way to go back to flash bios? I flashed the 1st bank on,on,off,off,off, but It was a bad bios version. So I found the back up and tried to flash to that with what was promised to be a good version but it sat there for three hours and I finally had to unplug my box. So in short can anyone help me get back to square on with a good bios?:eek:
 

DJBOOBY

VIP Member
Sep 24, 2005
5,354
0
Australia
when you say backup you mean power eject at same time
this will get you to your backup bank which has flashbios 3.0.1
if you have a v1.6b this will not work you should have flashbios 3.0.3 on main bank switch too off on off off off this should get you flasahbios for v1.6b xbox
do not flash over this if you have not goot working backup power eject change switch be fore you flash bios to chip
 
Last edited:

mike2k1

Noob Account
Feb 3, 2006
6
0
palmdale
put it like this I've tried to flash to the chip on both sets of bios and they both failed now I want to try to start over.
 

mike2k1

Noob Account
Feb 3, 2006
6
0
palmdale
I didn't push eject and power i toggled the swithes in the front banks. The first flash bios was 3.0.1v and the next version was 3.0.3v i think i just want to get my chip back to it's orginal set up because the two bios I downloaded from xbins were bad.
 

DJBOOBY

VIP Member
Sep 24, 2005
5,354
0
Australia
all you have to do is push power eject at sametime this will get you flashbios 3.0.1 then you can flash the chip with a working bios to the two 1mb banks or flashbios to all 8 banks just try power eject for me just once if you can,t get it to work you have to do a hotswap
 
Last edited: