is this cr rev c fixable

[johnny429az]

I wanted to see if this was fixable. Can I use glue for the wire c port or how do I repair.

 

[Utmad]

Follow the trace back from C until you can find a point to solder to

 

[gazcoigne]

glue is not conductive!! :facepalm:

scrape the trace leading away from the missing pad and solder to that, or do as Utmad says and trace it back to the chip leg it originates from and solder to there but if you lift pads that easy youll never manage to solder to a chip leg.

 

[ablegepu]

Looks like r10 is where the trace leads to (the resistor right below pad c). Just solder the wire to that resistor on the side closest to the c pad

 

[n1ght0wl]

a little bit of searching wouldnt of gone a miss

 

[daretogo]

I wanted to see if this was fixable. Can I use glue for the wire c port or how do I repair.

As already clarified, looks pretty clear that you could use the side of the resistor R10

 

[johnny429az]

Thanks everybody ill go try that.

 

[nofeloniesyet]

Thanks everybody ill go try that.

also y do you appear to have 2 threads up for the same thing?

 

[ablegepu]

And did you ever get it flashed with a trimming file?

 

[scott1503]

And did you ever get it flashed with a trimming file?

Why is that important ? And it's not a trimming file

 

[johnny429az]

It wasn't flashing green cause my wire soldering but fixed now.

 

[ablegepu]

I know what it is. I accidentally put two m's and tapatalk added an r but your talking about his other thread which was actually that he couldn't get it flashed with an xsvf

 

[scott1503]

I know what it is. I accidentally put two m's and tapatalk added an r but your talking about his other thread which was actually that he couldn't get it flashed with an xsvf

Even tho he said it was fixed so assuming I'm reading properly he no longer has the issue of writing a time file to the coolrunner

 

[ablegepu]

He's had multiple problems so I asked HIM. Why you begin a d**k? You worried someone out there might know more than you?

 

[scott1503]

He's had multiple problems so I asked HIM. Why you begin a d**k? You worried someone out there might know more than you?

Nope just stating the facts

 

[ablegepu]

Well if you knew what his other thread said you wouldn't have had to ask why he had 2 threads that were the same thing. W/e dude he got his answer, not trying to argue with you

 

[scott1503]

Well if you knew what his other thread said you wouldn't have had to ask why he had 2 threads that were the same thing. W/e dude he got his answer, not trying to argue with you

Neither am I but when did I ask why he had 2 threads ? Sorry am I missing something I didn't even post

 

[nofeloniesyet]

Neither am I but when did I ask why he had 2 threads ? Sorry am I missing something I didn't even post

i was the one that asked,and it wasnt to be a douche,its confusing when it looks like practically same issue in title,also he dont say if its the same cr he was just using in the other thread,just cause someone asks a question dont mean they are trying to be a d**k,wtf is wrong with this place anymore?

 

[scott1503]

I wasn't saying anyone was a douche neither was I intending to be a d**k so I oppoligise if I was

 

[BL4K3Y]

The OP has been given a suitable answer.

Thread closed.