Issues with Demon is it the install or is it my computer?

[kizersozeus]

I have recently got a trinity with demon installed it boots retail no problem and from my understanding it booted the glitch before without issue. When I connect the demon to try and read and right it JRunner crashes 100 % of the time and I get this in the one window

Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: jrunner.exe
Problem Signature 02: 0.2.288.18
Problem Signature 03: 513b14a2
Problem Signature 04: JRunner
Problem Signature 05: 0.2.288.18
Problem Signature 06: 513b14a2
Problem Signature 07: d9
Problem Signature 08: 6d
Problem Signature 09: System.NullReferenceException
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789



I am just wondering if it is a PC or an install thing?

 

[BL4K3Y]

J-Runner appears to detect the DemoN, but it doesn't show it's firmware version or which NAND is selected at the bottom.

Is the switch set to XB on the DemoN?

Have you tried the DemoN Toolbox?

 

[kizersozeus]

Yeah I just took it all apart and took a look at it set it to pc with power off and usb disconnected and it read the demon and detected it but it will not read it from the other usb that is attached with ribbon cable. I am having an impossible time glitching it with a cr3 pro and was wondering if maybe the image on demon was different than the one for the 360. Never usually get systems that were already worked on.

 

[kizersozeus]

Also when I connect jrunner to the xbox and read the nand it is the same as as when I read it directly from demon in PC mode. when I turn blue light off in Demon retail boots no problem.

 

[Martin C]

I'm assuming since you're asking for help, you've carried out the necessary checks for continuity?

 

[kizersozeus]

One other thing I just noticed the Ground wire was not connected to the switch mounted to the back. Once I connect that ground wire the Demon no longer shows up at all

 

[Martin C]

I don't think you should do anything more until you carry out the checks required.

 

[kizersozeus]

Sorry Martin I did do all the checks everything is there. I can switch to retail and the console boots up with no problem. Here are some pics: https://imageshack.us/a/img6/6103/img20130417195641.jpg

 

[Martin C]

So you've checked continuity from each QSB solder point (and RB) against the NAND on the topside of the 360 console. Also checked adjacent solder points to make sure there are no shorts? Finally, with the DemoN now installed, NEVER set it to PC.

 

[kizersozeus]

It ended up being something with my PC. I took it and plugged it into my other laptop and everything decided to work. I guess it just didnt like the windows I was running.