First I couldn't get my xBox to boot with the chip, those days are over. The xBox boots up fine now, however the screen stays blank. Same thing for debug mode. I'm using component video right now and I'm worried that might have something to do with it so I tried it with a standard RCA hookup and the same thing happend. Boots up great when chip is ignored. What could it be?
I've almost got it! Please help me!
- Thread starter Sspaaz
- Start date
Martin C
VIP Member
Any clues as to what Xbox version you have?
If it's a 1.6b, you'll need FlashBIOS 3.0.3 installed on the chip in order to see anything..
Martin
If it's a 1.6b, you'll need FlashBIOS 3.0.3 installed on the chip in order to see anything..
Martin
YES!!! I have a v1.6b motherboard. So how do I get the flashBios 3.03 on there then if I can't see anything? What are my options?
as we have been posting for 4 weeks now - you need to be checking your xbox version and then ask your seller to upgrade the mod to flashbios v3.03 if you have a v1.6b
if you havent done this then you will just get a blank screen. you need to get a freind with an older xbox and do a hotswap flash or send it to your seller for reflashing.
if you havent done this then you will just get a blank screen. you need to get a freind with an older xbox and do a hotswap flash or send it to your seller for reflashing.
yeah sorry.
I just wasn't about to send it back to the seller and I wasn't sure what a 'hotswap' was but I think I can figure it out.
One thing I've been unable to find though is if I reflash my chip with flashBios 3.03 should I leave it at 256k or should I make it 1MB with bios manager or does it even matter?
I just wasn't about to send it back to the seller and I wasn't sure what a 'hotswap' was but I think I can figure it out.
One thing I've been unable to find though is if I reflash my chip with flashBios 3.03 should I leave it at 256k or should I make it 1MB with bios manager or does it even matter?
laptop and jf
hi all can someone tell me why i need to install via drivers when laptop flashing but jf tells me to remove them ?
thanks
hi all can someone tell me why i need to install via drivers when laptop flashing but jf tells me to remove them ?
thanks
Re: laptop and jf
There is actually a different set of drivers called uniATA. Sorry but I don't have a link of those drivers right now.
There is actually a different set of drivers called uniATA. Sorry but I don't have a link of those drivers right now.
Re: laptop and jf
there is a guide available using the irc chat fucntion within jf!
once you have connected to channel type the following:
? pcmcia
it will give you a link to the guide!
Yeah UNIATA drivers!PowerLion1 said:
there is a guide available using the irc chat fucntion within jf!
once you have connected to channel type the following:
? pcmcia
it will give you a link to the guide!
Re: laptop and jf
A via pci card that jungleflasher refers to, will function with a status 39, drivers removed and even outside the windows enviroment and dos,thats the difference between the two.
a pcmcia card can only operate within a windows enviroment,and for the via ports to show up, drivers need to be installed and working,but the via drivers will cause freezing but faking uniata drivers as via drivers,allow the pcmcia card to function.doggs23 said:
A via pci card that jungleflasher refers to, will function with a status 39, drivers removed and even outside the windows enviroment and dos,thats the difference between the two.
Re: laptop and jf
i get it now thanks. ive got these drivers (VIA Hacked Drivers layton360) cause im on vista and there is no uniATA drivers for vista will the layton360 drivers work without freezing thanks
i get it now thanks. ive got these drivers (VIA Hacked Drivers layton360) cause im on vista and there is no uniATA drivers for vista will the layton360 drivers work without freezing thanks