GENERAL ixtreme burner max firmware help

[bobbyt]

i bought a ihas 124 burner from xconsoles and i flashed everything the correct way its just everytime i verify the disc through imgburn it gives me a unrecognizable error message and wont verify what am i doing wrong?
burning at 4x using optimum power colabiration

 

[mayday295]

There are a couple settings you need to make sure you have on, a quick search should tell you all you need to know. If that doesn't work make sure youve flashed it correctly.

 

[jlc2787]

So it burns but it does verify? Please provide more information...what disc are you using...etc.

 

[jlc2787]

Any updates?

 

[dogeatdog]

The usual suspects. Tried Verbs at 2.4x as well ?

 

[jonnybravo]

@ bobbyt imgburn fails to verify. Does it fail for you at the layer break? If so I had the same problem. Need some more info first. how is the drive connected?

 

[WARRIORX]

@ bobbyt imgburn fails to verify. Does it fail for you at the layer break? If so I had the same problem. Need some more info first. how is the drive connected?

interested to know how you sorted your problem as I can't get the burner to verify past the layerbreak using 003 singapores even if I try to burn standard backups (not xgd3) still error at layerbreak.

Drive is connected in raid which might be the problem as I had to connect the drive with my usbpro to flash it.

EDIT- By raid I mean the drive is connected by onboard sata point but system is running raid

 

[Ubergeek]

So as you've answered the question to your problem.....fix it.

 

[WARRIORX]

So as you've answered the question to your problem.....fix it.

If that reply is for me ubergeek then I don't know for sure if its the raid connection which seems unlikely, need to test it out though.

If it does turn out to be the raid connection then I will need to use the drive as an external connected via usb360pro which im not keen on doing.

EDIT- by raid I mean its connected to an onboard sata point but system us running raid.

Sent from my GT-I9100 using Tapatalk

 

[jonnybravo]

Well in ubers guide it says "Any SATA Chipset (NON-AHCI Mode) or XECUTER X360USB PRO"
For me the problem is I have a ssd that needs sata ports to be in AHCI mode and I didn't have a x360usb pro. So I thought I would try with my via chip sata and my on board Intel sata. That failed to verify at layer break and since windows doesn't like it when you change to non-AHCI mode in bios I grabbed another pc that has nvidia sata ports which was set for non-ahci mode. Worked perfect.
Since all these guides are written with the 360usb pro in mind I will be buying as soon as I can afford it. In the long run it will pay for itself with less coasters.

 

[jt415gz]

IDE baby

 

[Denxerw]

Does anyone know if c4eva release any new ixtreme burner max firmware that maybe be capable to burn xgd3 games even at other disc than verbatim dvd+r dl made in Singapore because ALL the brand i try(Intsenso, philips, tdk, maxell) even verbatim dvd+r dl made in India i don't have the success that i have with verbatim dvd+r dl made in Singapore.

A LOT OF THANKS.