J-Runner doesn't detect nand-x can't read nand

[ASASAN8]

Not bad soldering can read in nandpro 3.0 but not J-Runner I copied the .dll tp my System32 folder also please help

 

[BL4K3Y]

Which Flash Config do you get in NandPro?

J-Runner doesn't use NandPro so you can't really compare the two.

 

[ASASAN8]

0x01198010 is the flash config its a Falcon

 

[BL4K3Y]

Your soldering appears to be fine or you wouldn't get a correct Flash Config.

What does J-Runner tell you when you try and read the NAND?

 

[ASASAN8]

Device not found
Can not continue

 

[BL4K3Y]

Is your NAND-X running V3 ARM firmware?

J-Runner will only work with USB SPI devices flashed with ArmV3.hex.

 

[ASASAN8]

Yes sir I had to buy the cK3i to update it, it works in Nandpro 3.0 which needs the V 3.hex
was the program supposed to install or just unzip? Im running Windows 7 32 bit mabey run as admin in XP service pack 3 mode?

---------- Post added at 02:22 ---------- Previous post was at 02:19 ----------

is the driver included with J-runner signed??

 

[BL4K3Y]

Delete the DLL you "copied" and make sure you have .NET Framework 4 installed.

You could try running J-Runner as Administrator, I have been using it fine for the past couple of days and I am using Windows 7 Ultimate x86.

 

[ASASAN8]

My windows is fully up to date only one optional update I just took

 

[BL4K3Y]

What does your NAND-X report as in Device Manager?

 

[ASASAN8]

Im also running win7 Ultimate

---------- Post added at 02:34 ---------- Previous post was at 02:33 ----------

PRUFTECHNIK USB DEVICES
XECUTER NAND-X USB

 

[stefanounick]

You were asked to delete the .dll from system32. Do It

 

[ASASAN8]

Ive made plenty of Jtags in the past and probably RGH'd about 10 or so 5 or 6 just to retrieve the dvd key

---------- Post added at 02:37 ---------- Previous post was at 02:36 ----------

I did delete it sorry I didnt type that I did

 

[stefanounick]

It might be the easiest, did you try unplugging and repluggin the nand-x?

 

[ASASAN8]

yeah just restarted my computer n all

 

[ASASAN8]

Deleted the device and driver from device manager and reinstalled now I can read\write nands thanks!!!!!!!