J-Runner Header is wrong..

T0MMYI30Y

Noob Account
Feb 8, 2014
2
1
TX Product(s) used: Nand-x, Coolrunner Rev C (not connected Yet)
Console Type: Falcon
NAND size: 16mb
Dashboard version: e.g 2.0.8955.0
CB version: Don't Know yet
Screenshot of NAND details from J-Runner:
Untitled.png
J-Runner log:
Flash Config: 0xFFFFFFFF
FFFFFFFF
Falcon Manually Selected
Reading Nand to C:\Users\Tom\Desktop\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump1.bin
Reading Nand
Done!
in 17:09 min:sec
Reading Nand to C:\Users\Tom\Desktop\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Wrong Version.
Images of close-up soldering to motherboard:
(Sorry for bad quality, these were taken with my phone)
SAM_16734.jpgSAM_16776.jpgSAM_16807.jpg

Description of problem: This is my second RGH on a falcon board and I had no problems reading the nand before, with this Falcon motherboard it comes up with: Header is wrong.. on the stock nand. I have removed the nand x wires and re soldered them on numerous times, I am using J-Runner but have also tried Nandpro. could anybody help?

Was the console working before you started: Yes
 

Attachments

Last edited:

moco

VIP Member
Feb 3, 2004
458
0
Australia
Youve shorted it. Look at that solder ball on your nand pad, and are those scratched traces or is that solder?
 

moco

VIP Member
Feb 3, 2004
458
0
Australia
youve broken the console. you need to send it to someone that knows what their doing. its that simple really.