Hi, I own two near Identical 360's both with 7371 (exploitable) firmware , with facon boards
after buying a Nand X kit , with high hopes, I used the Coolshrimp Jtag tool , followed this guide on YouTube
guide (though video is for Xeon , mine is a Falcon )
[video=youtube;xUggR0OQfhs]http://www.youtube.com/watch?v=xUggR0OQfhs&feature=related"[/video]
I managed to finally install the Jtag , after flashing the nand with freeboot and Xell . However My J-tag was not completely successfull , I had somehow killed the drive after 10 mins of use after J-tag , shortly after console kept RRODing (error code E75 1023 so I removed the J-tag and then flashed back the original firmware which worked for a while , though drive was still dead , I ended battering it to try and eject the disc :duh: . Console finally died RIP
So I have another Falcon console , that is also expoitable with 7371 Firmware , question is:
how did I go wrong last time ?
after buying a Nand X kit , with high hopes, I used the Coolshrimp Jtag tool , followed this guide on YouTube
guide (though video is for Xeon , mine is a Falcon )
[video=youtube;xUggR0OQfhs]http://www.youtube.com/watch?v=xUggR0OQfhs&feature=related"[/video]
I managed to finally install the Jtag , after flashing the nand with freeboot and Xell . However My J-tag was not completely successfull , I had somehow killed the drive after 10 mins of use after J-tag , shortly after console kept RRODing (error code E75 1023 so I removed the J-tag and then flashed back the original firmware which worked for a while , though drive was still dead , I ended battering it to try and eject the disc :duh: . Console finally died RIP
So I have another Falcon console , that is also expoitable with 7371 Firmware , question is:
how did I go wrong last time ?