Is there another part of the board i can place my J2D2 wires to as i have burnt my copper connections on the actuall J2D2 
. any help wou;d be great
. any help wou;d be greatJ2D2 Alternate Points ?
- Thread starter shawnclift
- Start date
- Jun 4, 2010
- 3,080
- 0
I was afraid of that and and was going to tell you to leave it for someone else to do it seeing how many times you couldn't get it work.
I personally don't know of any alternative points but if there are someone else on here might be able to point them out but I really doubt it.
We know by now that your Mrs/wife/or girlfriend has taken your camera to Poland, but for god sake get a decent camera and take some close up high resolution pictures. Maybe someone here can fix what you messed.
I personally don't know of any alternative points but if there are someone else on here might be able to point them out but I really doubt it.
We know by now that your Mrs/wife/or girlfriend has taken your camera to Poland, but for god sake get a decent camera and take some close up high resolution pictures. Maybe someone here can fix what you messed.
Last edited:
yeah she comes back in a few hrs il take a pic then .
If anyone knows if there is any othe altanate point of J2D2, i would be very gratefulhttp://uk.search.yahoo.com/search;_ylt=A0oG75RR22NMezYAVw1LBQx.?ei=UTF-8&fr=yfp-t-702&p=grateful&SpellState=&fr2=sp-top
. If anyone knows if there is any othe altanate point of J2D2, i would be very gratefulhttp://uk.search.yahoo.com/search;_ylt=A0oG75RR22NMezYAVw1LBQx.?ei=UTF-8&fr=yfp-t-702&p=grateful&SpellState=&fr2=sp-top
Uploaded with ImageShack.us
Ok last photo with the iphone just to give you a blurry clue to the burnt holes
to fix the conductive copper would these work ?
http://www.maplin.co.uk/Module.aspx?ModuleNo=36275
http://www.maplin.co.uk/Module.aspx?ModuleNo=33837&OrderCode=N74AA
http://www.maplin.co.uk/Module.aspx?ModuleNo=36275
http://www.maplin.co.uk/Module.aspx?ModuleNo=33837&OrderCode=N74AA
their is a post around that i made with alt j2d2 points but i will tell you they are 1/8 the size of the actual pin header
Last edited:
- Jun 4, 2010
- 3,080
- 0
Picture is too blurry even a blind man would complain about it . As for using conductive silver paint to repair it only if you can trace it to the track printed on PCB and seeing how you managed to screw the original points I wouldn't even suggest you attempt anything like this (you'll end up killing your console) at least now worst case you can't jtag it but you can still use it.
. As for using conductive silver paint to repair it only if you can trace it to the track printed on PCB and seeing how you managed to screw the original points I wouldn't even suggest you attempt anything like this (you'll end up killing your console) at least now worst case you can't jtag it but you can still use it.
- Jun 4, 2010
- 3,080
- 0
Thanks Xmods, these sure can come in handy. Got a Zephyr board that is in pretty bad shape, certainly worth trying these points on it.
I dont get how you guys got so good at what you do, if you just give up so early .
thanks alot xmod, never would have thought there under the gpu heatsink.
.thanks alot xmod, never would have thought there under the gpu heatsink.
BGAMods
VIP Member
i just woke up 1 morning and realised i could do it.
on a serious note though, the point is if people **** up the original points then theyve really got no chance of soldering to the alt points. its not always the case but the majority of the time people need to be told to give it to a pro before they destroy a perfectly good 360.
on a serious note though, the point is if people **** up the original points then theyve really got no chance of soldering to the alt points. its not always the case but the majority of the time people need to be told to give it to a pro before they destroy a perfectly good 360.
i can still dump my original nand so all is not lost yet
iv learnt so much from doing this so far with soldering and parts to the xenon motherboard. Hey we all hav to start some where and i aint no pusssy who just gives up.
ok this is a pic of with a real camera iv bought the maplin conductive pen and fixed the J2D" points . well i hope i have. Verddict please ?
Uploaded with ImageShack.us
iv learnt so much from doing this so far with soldering and parts to the xenon motherboard. Hey we all hav to start some where and i aint no pusssy who just gives up.
ok this is a pic of with a real camera
iv bought the maplin conductive pen and fixed the J2D" points . well i hope i have. Verddict please ?
Uploaded with ImageShack.us
Also hooked up the diodes under the console because ther are still copper on that side .
and on top i remarked the J2D2 holes and made sure there is no clashing with them
Uploaded with ImageShack.us
and on top i remarked the J2D2 holes and made sure there is no clashing with them
Uploaded with ImageShack.us
e79
I dont get it, i can read the nand perfect no bad blocks atall.I can go thourgh the whole flash process- no problems. placing orig.bin- no problems, fully working again. but installing the flashed xbr.bin = e79.
iv check the solder and yeah i screwed it a bit but iv replaced the burnt J2D2 connections and they look just fine.
Switching diodes im using. could this be the random xenon e79 board ?
I dont get it, i can read the nand perfect no bad blocks atall.I can go thourgh the whole flash process- no problems. placing orig.bin- no problems, fully working again. but installing the flashed xbr.bin = e79.
iv check the solder and yeah i screwed it a bit but iv replaced the burnt J2D2 connections and they look just fine.
Switching diodes im using. could this be the random xenon e79 board ?
Which Switching Diodes are you using ?e79
I dont get it, i can read the nand perfect no bad blocks atall.I can go thourgh the whole flash process- no problems. placing orig.bin- no problems, fully working again. but installing the flashed xbr.bin = e79.
iv check the solder and yeah i screwed it a bit but iv replaced the burnt J2D2 connections and they look just fine.
Switching diodes im using. could this be the random xenon e79 board ?
diode - http://www.maplin.co.uk/Module.aspx?ModuleNo=46386
Iv come acrose this guys problem - http://forums.xbox-scene.com/index.php?showtopic=714563
I also have lost an r2e2 resistor so im gonna replace it with this - http://www.maplin.co.uk/Module.aspx?ModuleNo=341607
but with the w1k5. i think thats the same resistor that this guy is talking about ?
Iv come acrose this guys problem - http://forums.xbox-scene.com/index.php?showtopic=714563
I also have lost an r2e2 resistor so im gonna replace it with this - http://www.maplin.co.uk/Module.aspx?ModuleNo=341607
but with the w1k5. i think thats the same resistor that this guy is talking about ?
BGAMods
VIP Member
Why don't you try the old JTAG wiring method for Xenon? Instead of using the switching diodes, use 330ohm resistors. Who knows, they may work out for you
sick360mods
BANNED
ha that answers my question i just asked u flash but can u check the website i sent in the pm to see if they are the right diodes