J2D2 Alternate Points ?

[shawnclift]

ok guys just an update.iv soldered and fixed the R2E2 resistor.



Uploaded with ImageShack.us

But when i install xell i now just get a flashing green rro ??? better than an e79 for sure but any idea what this is about ?

 

[M AzeeM K]

ok guys just an update.iv soldered and fixed the R2E2 resistor.



Uploaded with ImageShack.us

But when i install xell i now just get a flashing green rro ??? better than an e79 for sure but any idea what this is about ?

It means your JTAG connections are working but there seems to be some problem with XeLL.

Get XeLL for your console and XeLLous from Xbins. Write XeLL to your NAND manually using Nandpro. Then update it with XeLLous. Your Xbox360 should boot up to the blue screen then

 

[shawnclift]

ok thats french to me, how do i update with XeLLous ? i just got it off xbins

 

[M AzeeM K]

ok thats french to me, how do i update with XeLLous ? i just got it off xbins

What, you don't know french?

From big_ted's tutorial:

flash xell (free60 version)to the console you are flashing a file approx 1.3mb in size double check this before you start flashing so not to overwrite the rest of the nand.
MAKE SURE TO HAVE THE VERSION FOR YOUR BOARD

zephyr would be
nandpro usb: -w16 zephyr_hack_updxell.bin 0

xennon would be
nandpro usb: -w16 xenon_1921hack.bin 0

big block jaspers (edit the 256/512 to suit)
nandpro usb: -w256/-w512 jasper_6723_hack_for_256mb_512mb.bin 0


update the xell with xellous
open the xellous rar image and extract xell-1f.bin

nandpro usb: +W16 xell-1f.bin 40

once this is done remove the power cord and wait 30 seconds or so,
plug in the composite av lead and the network cable,
If it has worked correctly then after the blue screen with writing you should see at the bottom the dvd key and the cpu key displayed for you, and then a line httpd listen: make a note of the ip number after that, (you can just write down the cpu number but this takes the human error out of the equation)
open up firefox on your pc and type in that ip address
you should be prompted with a white screen with some options.
click download for fuses this gives you a txt file with cpu key and dvd key.

once you have the info power down the console.

 

[shawnclift]

Right i tried that guide and still flashing green light. but i dont get how he usb to get xellous to work? what did he do with the usb ?

 

[manwithoutname]

Right i tried that guide and still flashing green light. but i dont get how he usb to get xellous to work? what did he do with the usb ?

Just out of interest, how are you powering on the console? Are you using the eject button? Is your DVD drive connected (not that I think it matters)?

 

[M AzeeM K]

Right i tried that guide and still flashing green light. but i dont get how he usb to get xellous to work? what did he do with the usb ?

Since Nand-X uses USB as an interface to read/write the NAND, therefore you have to write USB in NandPro.

 

[shawnclift]

no dvd drive installed.

And in the guide he says he uses the usb in the back now is that the back of his pc or xbox.....now im thinking about it i think he means pc

 

[shawnclift]

oh yeah an d powering on with eject key with rro in place still.

 

[shawnclift]

iv tried that way a few times and that gets me the e79 error

 

[shawnclift]

Nope no luck guys. iv tried pretty much all the options. i either get the dlashing green light on the rol or just a e79.as you can see in the pics theres nothing wrong with the connections out of options

 

[M AzeeM K]

Nope no luck guys. iv tried pretty much all the options. i either get the dlashing green light on the rol or just a e79.as you can see in the pics theres nothing wrong with the connections out of options

Did you try the old Resistor method ?

 

[shawnclift]

yup 330ohm rsistors and nothing e79 or green flashing.