jasper 16 cb6751

M

Megro

Noob Account
Dec 19, 2011
6
0
sorry english is bad^^

i have a jasper 16 sb with a bad block in 3ba...i create a ecc with multi builder 7 xell boot ub but it boots not in freeboot it boots also never in mi orig nand when i flash it back... ldf is 5x i have check..is the block 3ba in system boot? what can i do!!
 
R

RnRdude

1
Oct 4, 2011
21
0
Netherlands
when you flash back original nand you need to flash back the orginal nand not the nand with fixed bad blocks(and remove power from glitch chip for original setup), why freeboot does not work I dont know either sorry but perhaps you did not remap bad block correctly. remap bad block after that make nand image with multibuilder. after that flash with -w16 not +w16 thats only for xell.
 
frostbyt

frostbyt

BANNED
Sep 18, 2011
129
0
Your original nand isn't booting now, cause you've updated the dash most likely with multibuilder and are going to have to edit your ldv options.
Martin C has a nice tut on this :)
Also I've had a jasper not boot xell on me at all, but installing a 68nf got me booting almost instantly.
 
J

JayDee

Full Member
Mar 4, 2003
50
0
Sweden
You created the ecc with multibuilder, but have you actually made a freeboot (nandflash.bin) with multibuilder too?

Dumb question, but you say nothing on how you made it, only the ecc...
 
M

Megro

Noob Account
Dec 19, 2011
6
0
my orig ldv is 5 i use a ldv 5 in multi nand..i make a ecc with muti and a img with multi...multi patch the cba vrom 6751 to 6750 with 6751 ecc when i make it with jatag tool xell boot not with 6751 it boot...with 6750 multi imig xell reloadet boot but no dash...when i flash the orig bin with rawflash it patch the block auto or?...
 
B

bruno_rv

VIP Member
Jun 8, 2010
181
0
Croatia
Use only multibuilder 0.7 as i have 0 problem with it till now. Can you boot to xell after you flash with rawflash?
 
Last edited:
B

bruno_rv

VIP Member
Jun 8, 2010
181
0
Croatia
You wrote also that it doesnt boot when you flash original nand. You tried to remove CR when you flashed back original nand dump?


Tapatalk
 
M

Megro

Noob Account
Dec 19, 2011
6
0
original dump 3x always bad block 3ba
chip install...ecc with cb 6751.....no xell..
chip instal ecc with cb 6750...xell boot.
chip install...hack img 6751...no xell ...no dash
chip install...hack img 6751...xell boot...no dash
chip not installed..flash my orig.bin (cb 6751) no dash no rod nothing...

i have check all wire 100x...bad block 3ba is this 4 boot dash?

---------- Post added at 08:15 ---------- Previous post was at 08:06 ----------

original dump 3x always bad block 3ba
chip install...ecc with cb 6751.....no xell..
chip instal ecc with cb 6750...xell boot.
chip install...hack img 6751...no xell ...no dash
chip install...hack img 6751...xell boot...no dash
chip not installed..flash my orig.bin (cb 6751) no dash no rod nothing...

i have check all wire 100x...bad block 3ba is this 4 boot dash?
 
A

ARUNCREATIONS

VIP Member
Oct 1, 2010
195
23
INCREDIBLE INDIA
www.facebook.com
Hai Megro

At first do u have compared ur original nands matched..
Then build a ecc image through multibuilder 0.7 it will say dowgrade to donar 6750 ok now write the ecc file to ur console.
Now get into xell with eject button if everything got correct u will be in xell
not down the cpu key and most important efuse ldv( no.of f below the cpu & dvd key)
shutdown console and with ur original nand again go into multibuilder rename ur original nand into nanddumb.bin and place in my360 folder and make a cpukey.txt in same folder and open it put ur cpu key there
Important note : find options.ini in my360 folder open it and find cfldv = put ur ldv value for example cfldv = 5 and save it.

Now Run run command and follow as per ur req and build a glitch image if its RGH and use rawflash4 with ur build image

Thats lol enjoy ur dash launch
 
M

Megro

Noob Account
Dec 19, 2011
6
0
hi

i have 4 orig images all compare bit all have 1 bad block in 3ba...i know this with ldf and multi its not my first rgh but is my first with 6751 and donor and it will not run...xell(xcellous) runst in 2 - 3 sec but with power butto nothin no boot no rod....orig nand ...hack nand ...no boot no rod...:-(
 
You must log in or register to reply here.