RGH Jasper 16mb bigblock

[alvess]

Hello.
I have nan-x v3 and three coolrunner revb.

The first xbox with jasper 512mb went smooth.

But the second im working on...
It's a Jasper 16mb bigblock BG 6450 dash 14699.
Tool: J-Runner.

I can dump the nand, and write back the .ecc file,
but it don't try to boot when i have done this.

The green light is not flashing:facepalm:

If i try with the orginal nand the green lamp is flashing on the coolrunner.

Seems to be some problem creating a correct .ecc file?

Please help.

---------- Post added at 19:08 ---------- Previous post was at 19:07 ----------

I mean CB 6750.

 

[Martin C]

You'll need to post pics of your soldering and wire locations.

 

[jtag360.nl]

A 16Mb Bigblock???

A bigblock is 256Mb or 512Mb

 

[Martin C]

A 16Mb Bigblock???

A bigblock is 256Mb or 512Mb

He might mean a Jasper 16MB Big Block controller, which would be correct and is totally irrelevant to the NAND size.

 

[jtag360.nl]

Ahaaa, now i get it. Thanks Martin.

 

[alvess]

Ok here you go

 

[alvess]

and the topside..

 

[alvess]

Yes that is what i mean, thanks.
J-runner calls it 16MB bigblock when i run mb info...
and there is two options for 16mb when to write back the nand. 16mb and 16mb smallblock.

 

[wienio]

Correct the yellow cable on FT6U7

---------- Post added at 20:26 ---------- Previous post was at 20:19 ----------

Correct the cable , better boots

 

[alvess]

Embarrassing :rolleyes2:

Thanks!

 

[Martin C]

Are you booting now?

 

[alvess]

Works perfect, thanks again!
Had to use Jtag tool thou, j-runner gave me outofmemory something.

//alvess

 

[Martin C]

Works perfect, thanks again!
Had to use Jtag tool thou, j-runner gave me outofmemory something.

//alvess

We've seen this before - increasing your virtual memory should resolve it.

JTAG Tool - Bleugh!

 

[alvess]

Tried the virtual memory.. no go..
But the strange thing is:
-if I load the nand from the first xbox i made a 64mb dump, it works.
-It's only the 16mb dumb that gives me the outofmemory error, this is when I load the orginal nand and try to create the final nand.
I get the error when it loads up until 50%...?
I have XP sp3.

 

[Martin C]

What's your flash config?