RGH Jasper 16MB freez random with HDMI

[Craps]

Hi
I have a jasper (v4.0) 16MB it freez random when using HDMI, if i use component cable it dont freez.

Some times it freez in FSD some times it freez in game, some times it goes back to FSD and the error message is coming up, other times it just freez and need to turn it off.
Its random, some times i can play a hole match in fifa12 other times i dont get in to the game other times it freez in first part of the match.

Any one have an idea how to fix this ?
Is it a RGH problem ore is it the console.

All wires its don as advised and solder probably, i have try to reroute wires but its the same. (its not my first RGH)

It will only glitch if cap is on GND and A, it glitch in 1 - 2 glitch and dont crash in start up.

Hope some one can help me on the right path wit this one.

Thx

 

[bruno_rv]

If it doesnt freeze with stock nand,probably your wiring problematic.
You can make 2-3 fixes
1. Fix the green wire, reroute it
2. Put a 50ohm wire instead of blue wire (you can use any wifi double shielded cable,i tried 2-3 type,all work ok)
3. Instead of onboard cap on CR rev B (if you use it) put a 68nF between point A and GND on your CR

 

[Craps]

Thx

1. is don no effect.

2. ill try this, need to get some and post back result.

3. its rev A i use 68nF between point A and GND, else it wont glitch

Have just had it running for 1 hour with component cable and no freez, wired its only with HDMI cable.

 

[daftdog198]

Have you tried a different HDMI cable

 

[Utmad]

Try insulating the wires from the board with masking tape in between as my jasper was doing the same but does not any more

 

[x360ccm]

i say the green wire move a bit.i had one here that a guy brung to me coz of the same issue.

i moved the green wire.it solved the issue.

 

[Craps]

Have you tried a different HDMI cable

Yes try 5 different HDMI on 5 different TV

---------- Post added at 13:02 ---------- Previous post was at 12:55 ----------

i say the green wire move a bit.i had one here that a guy brung to me coz of the same issue.

i moved the green wire.it solved the issue.

Have try to move both green and blue wire, still the same, im getting some double shield Coaxial wire tomorrow, ill try this on both blue and green wire and post back results.