ANSWERED Jasper 16mb Nand Error

Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
You obviously didn't read my roadmap for noobs.

Do me a favour and do the following:

nandpro usb: -r64 nand64.bin

upload this too.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
yes please.

the issue here is you do NOT have a 16MB Jasper. Had you followed my roadmap, you may not have been in this situation. I'm trying to build you a proper dump from your files, but need a good dump of your 16MB attempt first.
 
R

richard1972

Junior Member
Dec 3, 2009
16
0
Hull, UK
Martin C said:
yes please.

the issue here is you do NOT have a 16MB Jasper. Had you followed my roadmap, you may not have been in this situation. I'm trying to build you a proper dump from your files, but need a good dump of your 16MB attempt first.
Click to expand...
http://www.megaupload.com/?d=RLHLQGDK

---------- Post added at 07:44 ---------- Previous post was at 07:42 ----------
richard1972 said:
http://www.megaupload.com/?d=RLHLQGDK
Click to expand...
WRONG FILE will upload with another site.

---------- Post added at 07:49 ---------- Previous post was at 07:44 ----------
Martin C said:
yes please.

the issue here is you do NOT have a 16MB Jasper. Had you followed my roadmap, you may not have been in this situation. I'm trying to build you a proper dump from your files, but need a good dump of your 16MB attempt first.
Click to expand...
This is the correct matching file http://www.mediafire.com/?0y8l9dnq6i41i1x
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
ok - to rebuild your nand properly.

Take the nand64-1.bin file you sent me and the nand2.bin file you just uploaded. Put them in the same folder as nandpro.exe.

then run (in cmd prompt)

nandpro nand64-1.bin: -w64 nand2.bin

rename nand64-1.bin nanddump.bin

This should now open properly in 360 flash dump tool and you should be able to build an RGH image from it.
 
  • Like
Reactions: richard1972
R

richard1972

Junior Member
Dec 3, 2009
16
0
Hull, UK
Martin C said:
ok - to rebuild your nand properly.

Take the nand64-1.bin file you sent me and the nand2.bin file you just uploaded. Put them in the same folder as nandpro.exe.

then run (in cmd prompt)

nandpro nand64-1.bin: -w64 nand2.bin

rename nand64-1.bin nanddump.bin

This should now open properly in 360 flash dump tool and you should be able to build an RGH image from it.
Click to expand...
THANK YOU, THANK YOU & THANK YOU!!!
Xbox is working again and the Cool Runner works like a charm, where do i donate for the help, PM me if you prefer?
Cheers
Rich
 
You must log in or register to reply here.