JTAG Jasper 16mb R-JTAG Xell Booting problems HELP!

[Pokeastuff]

Doesn't really matter, The little pad came off and I can't solder to one of the points.....

 

[chase]

you gotta carefully scratch off the green surface mask to expose the copper trace and then bridge the 2 points together.. it may be a good idea to send it to a pro to repair if you're not feeling confident .. don't wanna cause any more damage

Okay thanks, Sorry do you mean J8C1? I can't find a J8C2

not to be an ass but that's pretty funny

the square one is always #1.. J8C2 would be the next one down (its labeled with a 2).. then you got the last 2 that are labeled as well

 

[jsinger47]

I don't think any scratching is necessary.

Looks like he just floated off the resistor.

In the case of a spelling error, I blame Tapatalk.

 

[chase]

Doesn't really matter, The little pad came off and I can't solder to one of the points.....

seems like he pulled a pad and can't bridge the 2 points.. OP, are u able to post another pic ?

 

[morinzo]

remove your heatsink and lightly scratch the green off of the pad where the red circle is in the pic and the solder a wire from the red circle to the yellow box. If you mess this up its is the last way I know of to fix that spot. Good Luck!!

 

[xlghost]

It won't turn on

If the xbox isn't turning on the missing R8C2 is not the cause...

 

[Pokeastuff]

So should I be soldering that Pink point to that Yellow point?? as well as taking off the heat sink and soldering a wire to the yellow point?

 

[Martin C]

I think you should be sending this to someone who can solder.

 

[BrockThunderjam]

So should I be soldering that Pink point to that Yellow point?? as well as taking off the heat sink and soldering a wire to the yellow point?

You can scrape the trace he lined out for you with a fiberglass brush to expose the copper and then solder a 30 AWG wire between the upstream pad and the trace. Honestly though this is not an easy repair and can lead to worse damage so if you know someone who does this sort of stuff on the reg you should look them up. If you insist on giving it a go make sure you use plenty of flux and try to arrange the wire such that it's not putting too much strain on the joint.

Edit-and you should also replace the resistor.

Sent from my iPhone using Tapatalk - now Free

 

[GSIBOY]

I suggest send it to a pro before more damage is done

 

[Pokeastuff]

Okay thanks, where would I be able to get a resistor to replace it? Or what is it called?

 

[Martin C]

You don't need to replace the resistor. You just need to bridge the connection.

 

[Pokeastuff]

Haha I got the point



Now do I connect the other part of the wire to the R8C2 point?

 

[Martin C]

Remove that wire before you pull that point completely.

Get a fibre glass pen and expose the trace nearest the 'good' pad.

Flux and tin.

Use a single strand of wire to bridge from the trace to that pad.

Done - you can now solder CPU_RST to J8C1.2

 

[Pokeastuff]

I'm sorry I don't understand. Is it alright if you can highlight in the picture i put up above? or just something visual?

 

[jsinger47]

Alternatively, the default cpu-rst point could be used.

In the case of a spelling error, I blame Tapatalk.

 

[Martin C]

1. Expose trace (bright red).
2. Solder a single strand of wire from the trace to the pad (green).
3. Use J8C1.2 for your CPU_RST (pink)

 

[Pokeastuff]

ITS ALIVE!!!

Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 06 
Post 1E - BRANCH 
Post 06 
Post 1E - BRANCH 
Post 06 
Post 1E - BRANCH 
Post 06 
Post 1E - BRANCH 
Post 06 
Post 1E - BRANCH 
Post 06 
Post 1E - BRANCH 
Post 06 
Post 1E - BRANCH 
Post 06 
Post 1E - BRANCH 
Post 06 
Post 1E - BRANCH 
Post 06 
Post 1E - BRANCH 
Post 06 
Post 1E - BRANCH 
Post 07 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 3F 
Post 07 
Post 07 
Post 0F 
Post 07 
Post 0F 
Post 07 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 07 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post CF 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 07 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 8F - Panic - MAINTENANCE 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 3F 
Post 0F 
Post 07 
Post 0F 
Post 7F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 8F - Panic - MAINTENANCE 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 7F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post CF 
Post 0F 
Post 0F 
Post 0F 
Post DF 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 3F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 3F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 3F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 


Post 0F 
Checking Files
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Finished Checking Files
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 7F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 7F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post EF 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 3F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post DF 
Post 0F 
Post 07 
Post 0F 
Post 7F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post CF 
Post 3F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 0F 
Post 8F - Panic - MAINTENANCE 
Post 0F 
Post 0F 
Post 07 
Post 0F 
Post 0F 
Post 0F 
Shutdown

Edit: I have a really cheap soldering iron so I couldn't get a single wire to solder... had to use the orange wire. It's well protected though.

 

[Pokeastuff]

sh*t, It's not turning on again.

 

[BrockThunderjam]

sh*t, It's not turning on again.

Your repair prob came loose. Your risking damaging the trace by using thicker wire. You don't need a "good" iron to do it properly, just use flux and be patient.


Sent from my iPhone using Tapatalk - now Free