Hi there so i decided to RGH my Jasper 16MB heres what happenes:
TX Product(s) used: **** Complete set + CR rev. C
Console Type: Jasper
NAND size: 16MB
Dashboard version: i think 2.0.15574.0 cuz FIFA 13 was the last game i played
CB version: my Nand Dumped said CB6751
Screenshot of NAND details from J-Runner:
I DONT USE J-RUNNER (****)
J-Runner log:
I DONT USE J RUNNER (****)
Image of Coolrunner:
Images of close-up soldering to motherboard:
Description of problem:
So i connected the **** with the QSB first but had many BadBlocks so i decided to solder the wires directly. Then i read out the Nand and it was without any Error. the i used ECC Glitch Generator to generate a ECC File and used NandPro to add it to my NAND Dump cuz the **** Software cant handle .ecc's. Then i wrote the ECC'ed Nand back to Console and booted up but nothing happened. So i checked all solder again and again but couldnt find any problems. So i did some research and found out that CB6751 need some special attention i didnt knew from beginning. So i searhed my Original Nand but couldnt find it anymore. So i downloaded a similar already with CB6750 patched Dumb from another XBOX Forum and flashed it on my Box. Then i booted up and every 5 seconds the Fan spins up higher. Also every 5 seconds the green LED on my CR blinks shortly but nothing more for 1 hour.... So i guess the CR connected correctly cuz it dont have any probs.
So i think my NAND is the Problem...
When i read the NAND i usually get 0 Errors but sometimes i get smaller files (16384 instead of 16896) or bad blocks at 0003 0027 0168
So my questions are:
1. Can i use the NAND of a smiliar Console?
2. If so can someone share another NAND with me so i can use it?
3. Is it problematic that the Cap near E contacts 1? (see picture)
4. What can i do so my XBOX get RGH'ed?
(btw i use RGH 2.0)
5. How to see if i got a Small or Big Block Jasper maybe thats the Problem?
I also uploaded the NAND im using if it helps.
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: Y
How long is the light on for each time: it just blinks like 0.25s
NAND: nanddump.rar
TX Product(s) used: **** Complete set + CR rev. C
Console Type: Jasper
NAND size: 16MB
Dashboard version: i think 2.0.15574.0 cuz FIFA 13 was the last game i played
CB version: my Nand Dumped said CB6751
Screenshot of NAND details from J-Runner:
I DONT USE J-RUNNER (****)
J-Runner log:
I DONT USE J RUNNER (****)
Image of Coolrunner:
Images of close-up soldering to motherboard:
Description of problem:
So i connected the **** with the QSB first but had many BadBlocks so i decided to solder the wires directly. Then i read out the Nand and it was without any Error. the i used ECC Glitch Generator to generate a ECC File and used NandPro to add it to my NAND Dump cuz the **** Software cant handle .ecc's. Then i wrote the ECC'ed Nand back to Console and booted up but nothing happened. So i checked all solder again and again but couldnt find any problems. So i did some research and found out that CB6751 need some special attention i didnt knew from beginning. So i searhed my Original Nand but couldnt find it anymore. So i downloaded a similar already with CB6750 patched Dumb from another XBOX Forum and flashed it on my Box. Then i booted up and every 5 seconds the Fan spins up higher. Also every 5 seconds the green LED on my CR blinks shortly but nothing more for 1 hour.... So i guess the CR connected correctly cuz it dont have any probs.
So i think my NAND is the Problem...
When i read the NAND i usually get 0 Errors but sometimes i get smaller files (16384 instead of 16896) or bad blocks at 0003 0027 0168
So my questions are:
1. Can i use the NAND of a smiliar Console?
2. If so can someone share another NAND with me so i can use it?
3. Is it problematic that the Cap near E contacts 1? (see picture)
4. What can i do so my XBOX get RGH'ed?
(btw i use RGH 2.0)5. How to see if i got a Small or Big Block Jasper maybe thats the Problem?
I also uploaded the NAND im using if it helps.
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: Y
How long is the light on for each time: it just blinks like 0.25s
NAND: nanddump.rar
Attachments
Last edited:
