RGH jasper 256 no power on

M

m4x192

Junior Member
Dec 18, 2011
16
0
hi all i have done rgh on my jasper 256 with jtag tool.
i removed all cable and nand x component from mobo excluded the coolrunner and the cable start from the coolrunner.

now the xbox dont switch on but the coolrunner led is red.

p.s. when all component was on the mobo xbox start and turn on. now nothing happen. help me pls ! thx
 
M

m4x192

Junior Member
Dec 18, 2011
16
0
im uploading

---------- Post added at 01:13 ---------- Previous post was at 01:06 ----------










---------- Post added at 01:14 ---------- Previous post was at 01:13 ----------

http://imageshack.us/g/502/img0175iz.jpg/

---------- Post added at 01:15 ---------- Previous post was at 01:14 ----------

this is the photo.
i need to remove the jtag (TX) with red and yellow cable?
 
I

ishockin

VIP Member
Feb 4, 2011
275
23
Ohio
wow you defiantly need to fix the 3v and maybe the standby clk
also need close up pics of the underside solder points
and why do you have the jtag portion?
 
J

jeremy790

VIP Member
Feb 6, 2011
294
0
Oklahoma
I will say again. It's most likely point B. "the orange wire" Whit that much solder you probably lifted it of the board. You will need to scrap part of it and repair it.
 
M

m4x192

Junior Member
Dec 18, 2011
16
0
guys i have distructed the r4b24 track near the resistor.
where can i sold a wire for bypass my error?
thx
 
TilVl

TilVl

VIP Member
May 11, 2011
1,383
0
Also you might want to consider getting someone else to do it for you. That soldering job is horrible.
 
M

m4x192

Junior Member
Dec 18, 2011
16
0
can i solt to the right of the resistor ?
i put an other resistor bypassing the old resistor..!

what is the resistor value?

so i remove the resistor and put another resistor "BIG" not smd.

help me pls thx
 
poisins

poisins

VIP Member
Mar 3, 2011
164
0
Alūksne, Latvia
You have to repair it. Electricy folws in circle, but you have cut that circle.... If you won't repair ir, console won't power on.

Solder one end of wire to resistor, other and of same wire to trace (you need to scrap trace clean, to solder to it).

Just follow to guide (there is one). If you have damaged SMD, it' 33 ohm resistor... Replace with big one, not smd

Sent from my GW620 (OpenEve 2.3.4) using Tapatalk
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Can you do ALL your soldering yourself and post the pics, as I REALLY want some new images on how to f**k up a perfectly good console?

(reverse psychology at work, hopefully!)
 
You must log in or register to reply here.