jasper 256 rgh wont boot

[edokassiah]

hey guys back with another pesky rgh
well i rgh this jasper a first time to retrieve the dvd key and everything worked fine booted xell grabbed the dvd key repaired it success

well i updated the thing to 14719 and now wanna rgh it again for perm use
but everytime i flashed a .bin created by jrunner it doesnt work i get a 0022

i have my cpu key and nand dump after it was updated to 14719 here is my jrunner log

Checking Files
Finished Checking Files
Initializing Nand..
Comparing...Takes a while on big nands
Nands are the same
* found flash image, unpacking....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6753
CB_B: 6753
CD (image): 6753
CD (decrypted): 8453
Not supported yet

any ideas guys? boot fine when i reflash the nand dump
but nothing else

 

[Coleman]

you can't reset glitch hack that dashboard. Must wait for RGH 2.0

Checking Files
Finished Checking Files
Initializing Nand..
Comparing...Takes a while on big nands
Nands are the same
* found flash image, unpacking....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6753
CB_B: 6753
CD (image): 6753
CD (decrypted): 8453
Not supported yet

Shouldn't have updated your dashboard.

 

[edokassiah]

you can't reset glitch hack that dashboard. Must wait for RGH 2.0

Checking Files
Finished Checking Files
Initializing Nand..
Comparing...Takes a while on big nands
Nands are the same
* found flash image, unpacking....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6753
CB_B: 6753
CD (image): 6753
CD (decrypted): 8453
Not supported yet

Shouldn't have updated your dashboard.

ahhhhhh really....thanks for the quick reply

 

[Coleman]

Not a problem. Try and trade it with a buddy if they have a older dashboard or sell it for a used one with a compatible dashboard.

 

[daftdog198]

Hi.
Im not %100 sure but cant you use one of your older nand dumps to build a rgh 14719 image then use the ecc image you made before for this console so you can boot xell and update to rgh 14719 from a usb stick.
You may need to change your ldv values

 

[superspeed]

Hi.
Im not %100 sure but cant you use one of your older nand dumps to build a rgh 14719 image then use the ecc image you made before for this console so you can boot xell and update to rgh 14719 from a usb stick.
You may need to change your ldv values

Um no!