jasper 256 wrong reading nand-x

[snoop123]

hallo

i have a jasper 256 now i tryd to read de nanddump with nanpro v3.0.
he has done that nandcompare no differences.

Bud when i put them in 360 flash dump tool he gives me Couldn`t read file.

What can i do.

 

[noobnotforlong]

Just read 64mb or shrink one down to 64

Nandpro usb: -r64 nanddump.bin

If you get any errors post them before you continue

Sent from my HTC Desire Z using Tapatalk

 

[snoop123]

Just read 64mb or shrink one down to 64

Nandpro usb: -r64 nanddump.bin

Sent from my HTC Desire Z using Tapatalk

I have don that

nandpro usb: -r64 nanddump.bin
nandpro usb: -r64 nanddump2.bin
fc /b nanddump.bin nanddump2.bin
no differences.

than load in 360 flash dump tool.
Couldn`t read file

Can i make a image_00000000.ecc.

 

[ball00]

Have you checked to see if you have bad blocks. These can stop the nand being opened in some of the nand programs.

 

[snoop123]

Have you checked to see if you have bad blocks. These can stop the nand being opened in some of the nand programs.

yes no bad blocks

 

[snoop123]

I can not build a image_00000000.ecc

 

[x360ccm]

is this your xbox .

last time i had a prob like this.

the guy it belong to had already wrote the ecc to the nand.and didnt tell me he had.

 

[noobnotforlong]

You can flash any jasper 256 ecc to it if you cannot build one


Does your image now open in 360 flash tool?

Sent from my HTC Desire Z using Tapatalk

 

[snoop123]

is this your xbox .

last time i had a prob like this.

the guy it belong to had already wrote the ecc to the nand.and didnt tell me he had.

Its myn
this one i tryt my first RGH on.
Bud that went rong on de soldering.

 

[RavenPhoenix]

What is the error that you are getting in 360 Flash tool when you try and open the file? Also, what version of the 360 Flash tool are you using? Provided that you have dumped the nand properly then there shouldn't be any reason why it won't open in 360 Flash.

 

[snoop123]

What is the error that you are getting in 360 Flash tool when you try and open the file? Also, what version of the 360 Flash tool are you using? Provided that you have dumped the nand properly then there shouldn't be any reason why it won't open in 360 Flash.

I have don that

nandpro usb: -r64 nanddump.bin
nandpro usb: -r64 nanddump2.bin
fc /b nanddump.bin nanddump2.bin
no differences.

than load in 360 flash dump tool v0.95.
Couldn`t read file

 

[noobnotforlong]

Upload the file and pm me the link

Sent from my HTC Desire Z using Tapatalk

 

[x360ccm]

try 360 flash dump tool v0.97

should open then.

 

[snoop123]

try 360 flash dump tool v0.97

should open then.

Just tryd it no luck.

 

[noobnotforlong]

Did you get any errors when reading

Sent from my HTC Desire Z using Tapatalk

 

[snoop123]

Did you get any errors when reading

Sent from my HTC Desire Z using Tapatalk

no averything was oke.
I did a compare.
no differences

 

[x360ccm]

the only thing i could open your nand in was XNandHealer.

i never used this before so dont no if it right.

 

[noobnotforlong]

I tried to make a ecc for both and it didn't make either tomorow ill get a jasper256/512 ecc file

Is read a couple more times checking my soldering and that it throws no errors before compareing the files

Sent from my HTC Desire Z using Tapatalk

 

[snoop123]

the only thing i could open your nand in was XNandHealer.

i never used this before so dont no if it right.

I tryt it also XNandHealer and he gave me the same.
And now i am running Jtagtool And he reads the nand as an jasper 512.
erro reading 250 block 10b0

 

[WNYConsoles]

Have you opened the nand bin in JTAG Tool? If so, check your task manager, one day I checked mine and I had 47 JTAGTool.exe running! If JTAG Took is still using the bin file then no other program can access it.

You can also test to see if this is the problem by simply copy/paste your nand and open the copy in 360 Flash Tool.