jasper 256mg big block help using jrunner

[imparable08]

hi i need help my nand dumps dont match i tried reading the whole dump but to many bad blocks.can i just use the 2mb nand reading option to rgh my jasper or do i have to dump the entire nand please help

 

[Justice1231]

Its probably down to your soldering, thats the main reason youve got a lot of bad blocks and reads that dont match, It might help if you were to post pictures of your install so as we can see and determine whether your soldering is good or not.

 

[Martin C]

Can you post the output from J-Runner? You should be able to copy/paste from the bottom left window.

 

[BraveH43]

Can you post the output from J-Runner? You should be able to copy/paste from the bottom left window.

double click on log window creates a txt file

 

[imparable08]

===================================================
Saturday, March 03, 2012 10:41:00 AM



No Updates Found


Checking Files
Finished Checking Files
Jasper 256MB
Arm Version: 3
Flash Config: 0x008A3020
Reading Nand
Error: 204 reading block 385
Error: 250 reading block 470
Error: 250 reading block 6B8
Error: 218 reading block 6BA
Error: 250 reading block 900
Error: 250 reading block 908
Error: 250 reading block 910
Error: 218 reading block 912
Error: 210 reading block 913
Error: 250 reading block 918
Done!

Arm Version: Initializing Nand..
3
Flash Config: 0x008A3020
Reading Nand
Error: 204 reading block 385
Error: 250 reading block 470
Error: 250 reading block 6B8
Error: 218 reading block 6BA
Error: 250 reading block 900
Error: 250 reading block 908
Error: 250 reading block 910
Error: 210 reading block 912
Error: 218 reading block 913
Error: 250 reading block 918
Done!

Comparing...Takes a while on big nands
0x06BA
0x0912
0x0913

 

[imparable08]

ok update i used another coolrunner kit re solder it to the xbox all my soldering is ok i know how to solder keep getting same block errors and to differences at the end of nand dump. i tried to dump the 2mb dump it reads the first dump but the second it says: out of memory Exception


===================================================
Saturday, March 03, 2012 10:41:00 AM



No Updates Found


Checking Files
Finished Checking Files
Jasper 256MB
Arm Version: 3
Flash Config: 0x008A3020
Reading Nand
Error: 204 reading block 385
Error: 250 reading block 470
Error: 250 reading block 6B8
Error: 218 reading block 6BA
Error: 250 reading block 900
Error: 250 reading block 908
Error: 250 reading block 910
Error: 218 reading block 912
Error: 210 reading block 913
Error: 250 reading block 918
Done!

Arm Version: Initializing Nand..
3
Flash Config: 0x008A3020
Reading Nand
Error: 204 reading block 385
Error: 250 reading block 470
Error: 250 reading block 6B8
Error: 218 reading block 6BA
Error: 250 reading block 900
Error: 250 reading block 908
Error: 250 reading block 910
Error: 210 reading block 912
Error: 218 reading block 913
Error: 250 reading block 918
Done!

Comparing...Takes a while on big nands
0x06BA
0x0912
0x0913
===================================================
Sunday, March 04, 2012 6:09:14 PM



No Updates Found


Checking Files
Finished Checking Files
Jasper 256MB
Reading Nand to C:\Documents and Settings\chula modz\Desktop\JRUNNER\output\nanddump1.bin
Arm Version: 3
Flash Config: 0x008A3020
Reading Nand
Done!

Initializing Nand..
Reading Nand to C:\Documents and Settings\chula modz\Desktop\JRUNNER\output\nanddump2.bin
Arm Version: 3
Flash Config: 0x008A3020
Reading Nand
System.OutOfMemoryException
Done!

Comparing...
Nands are the same


so its not my soldering

 

[stefanounick]

thats normal

Sent from my Nexus S

 

[dirtyscout]

whaats the ccoolrunner have to do with a nand dump??? this is an issue with bad soldering of the nand-x install wires

 

[stefanounick]

you got about 5 bad blocks (jrunner should report 40 bad blocks as it reads by increments of one small block and 8 small blocks is a big block, not all 8 of them are bad though) now, you see those non-250 read errors?
those are legit bad blocks not just blank blocks so with each read their contents are different
jrunner on compare takes in mind those bad blocks and "removes" them so it can see if the dumps match, but in big blocks, it does that only for the first 64mb, the rest is the memory unit so its ignored. in a future version it will notify you better of them

Sent from my Nexus S

 

[imparable08]

my question is can i use 2 mg dump to rgh this jasper or the big nand dump even do the dump dont match . and when i re installed the coolrunner kit i re solder new qsb kit too so no problem with soldering

 

[talonman9125]

dont know if this helps or not some time ago i was working on a 256 jasper with about the same problem i was using jtag tool (before jrunner came out) except my bad blocks weren't consistent i checked my soldering and heated up all the joints again then i would get the same but this time the errors were consistent so i compared them with total commander and they matched maybe try that for the sake of argument to compare your dumps and see if you get a different end result

 

[imparable08]

ok ill try total commander thanks

 

[stefanounick]

yes you can use your dump and no, not the 2mb one. where did you read to use the 2 mb one? nowhere

Sent from my Nexus S