Team-Xecuter Community
Console Type: Jasper
NAND size: 256
Dashboard version: e.g 2.0.16202
CB version: 6723
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
POST output from J-Runner (either POST_OUT monitor or RATER output):
(2 cycles is enough)
updflash.bin log (if applicable):
Image of R-JTAG board:
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem:
used the CR7112 to boot to xell = RROD
used R8C2 to boot to xell = got CPU key
flashed updflashed.bin
dip 4 = rrod
dip 5 = booted to dash
dip 6 = rrod
dip 1-3 = rrod
dip 5 again = rrod
Was the console working before you started: Y
NAND size: 256
Dashboard version: e.g 2.0.16202
CB version: 6723
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
Code:
===================================================
Friday, March 14, 2014 9:22:27 AM
J-Runner v0.3 Beta (4) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Jasper BB
Jtag Selected
Nand Initialization Finished
Initializing nanddump1.bin..
CpuKey is Correct
Added Key to Database
Jasper BB
Nand Initialization Finished
Moving All files from output folder to D:\J-Runner\011778484907
Aud_Clamp Selected
R-Jtag Selected
Load Files Initiliazation Finished
Clean SMC detected
Patching Jasper version 2.3 SMC at offset 0x12BA
16547
Started Creation of the 16547 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.11.647
---------------------------------------------------------------
base path changed to D:\J-Runner\xeBuild
---- { Image Build Mode } ----
building jtag image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
******* WARNING: could not patch SMC reset limit!
---------------------------------------------------------------
D:\J-Runner\011778484907\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16547.0
Console : Jasper (big block)
NAND size : 64MiB (system only)
Build : JTAG
Xell : power on console with console eject button
Serial : 011778484907
ConsoleId : 032741052644
MoboSerial: 8920913200258497
Mfg Date : 12/01/2008
CPU Key : 4AE218D079F2B4DCDCxxxxxxxxxxxxxxxx
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : E199D9A35E787D12065CDA93982C1F39
CF LDV : 4
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
===================================================
Friday, March 14, 2014 9:34:10 AM
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Downloaded *xeBuild/16547/_glitch.ini
Downloaded *xeBuild/16547/_glitch2.ini
Downloaded *xeBuild/16547/_glitch2m.ini
Downloaded *xeBuild/16547/_jtag.ini
Finished Checking Files
Initializing updflash.bin..
Jasper BB
Jtag Selected
Nand Initialization Finished
Aud_Clamp Selected
R-Jtag Selected
Jasper 256MB Manually Selected
Version: 10
Flash Config: 0x008A3020
Writing Nand
updflash.bin
Done!(2 cycles is enough)
updflash.bin log (if applicable):
Image of R-JTAG board:
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem:
used the CR7112 to boot to xell = RROD
used R8C2 to boot to xell = got CPU key
flashed updflashed.bin
dip 4 = rrod
dip 5 = booted to dash
dip 6 = rrod
dip 1-3 = rrod
dip 5 again = rrod
Was the console working before you started: Y