Jasper 265MB with dead SPI-Port in combination with RJTAG

[toko55]

Hello!
The SPI-Port of my Jasper 256MB is not working anymore because the values are different to the Nand-x troubleshooting guide.
I would to combine my rjtag ultimate kit with a DemoN to r/w the Nand ect.. . My question: Is all I need to get this working in the RJTAG Ultimate Kit and The DemoN phat Kit included? Or do I need DemoN upgrade Kit or other things.
Thank you

 

[chase]

I think you need the demon bb adapter... or you can wire it yourself

 

[gavin_darkglide]

If you order the Demon Phat it will come with every thing you need. There are other non Xecuter devices that will attach to the same points as a demon, but are not dual nand devices, just nand RW devices. The biggest problem with these devices dont work with J-runner.

 

[BL4K3Y]

I don't think you need the BB adapter installed if you're just reading/writing the XBOX 360 NAND.

If you are planning to dual boot for XBL, the adapter will need to be installed.

 

[toko55]

Okay. Thank you!