RGH Jasper 512 MB - J-runner doesn't remapped bad block

[TrueMan58]

Hi. I have Jasper motherboard 512 MB. I used nand-x to read nand. After read and compare j-runner doesn't auto remapped bad blocks. I dont know why. Its ok to go on or I have to somehow manually remap it ?

===================================================23. decembra 2014 22:56:53


J-Runner v0.3 Beta (7) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Happy Holidays Everyone!
Checking Files
Finished Checking Files
Version: 03
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 6754
Jasper 512MB Manually Selected
Reading Nand to C:\Users\XBOX\Desktop\J-Runner\output\nanddump1.bin
Reading Nand
Error: 250 reading block 3A0
Error: 210 reading block 3A1
Error: 210 reading block 3A2
Error: 210 reading block 3A3
Error: 210 reading block 3A4
Error: 210 reading block 3A5
Error: 210 reading block 3A6
Error: 210 reading block 3A7
Done!
in 9:03 min:sec


Reading Nand to C:\Users\XBOX\Desktop\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Reading Nand
Jasper 512MB
Jtag Selected
Nand Initialization Finished
Error: 250 reading block 3A0
Error: 210 reading block 3A1
Error: 210 reading block 3A2
Error: 210 reading block 3A3
Error: 210 reading block 3A4
Error: 210 reading block 3A5
Error: 210 reading block 3A6
Error: 210 reading block 3A7
Done!
in 9:03 min:sec


Comparing...Takes a while on big nands
Nands are the same

Thanks for help and sorry for my english.

 

[Nintendo]

You can use XnandHealer to remap the bad blocks on the retail nand, your noremap box on Jrunner is ticked? When writing Xebuild it will repair them as i am aware.

Happy holidays!

 

[TrueMan58]

Noremap is unchecked. I wont that remapping usually start with nand comparing. So you telling me that I can write ECC without the risk and remapping should start with writing webuild ?

 

[scott1503]

Personally I would touch up all the points and redump the nand some of the joint seem week and may need s little more solder, but remember to apply more flux to help the solder flow properly

 

[TrueMan58]

I already resolder all wires twice. Also I tried use JRP 2 to dump bud still have bad block at same place...

 

[Oggy]

Outside the important area