Jasper 512 not glitching

[jenipapo]

This is not my first Jasper 512, but this one is not working.
Read the nand and made the ECC file with Multi Builder 0.82
Flashed it with Nandpro ( +w64 )
Wired the Coolrunner Rev. B just like the pictures recomended. But it does not glitch.
The green light of coolrunner flashs every 5 secs, around seven times, then it stops to blink and the game does not glitch.
(CB 6571, Multi builder got it and used a 6570).
Any help please?
Are pictures necessary?
I appreciate any help, Thank you!

 

[xColorado880]

I assume you are using the cap since its a Rev B?

Could be an issue with wires since most jaspers I've had boot instant with the cap bridged.

 

[jenipapo]

Coolrunner Rev. B has the cap on the board, does need to solder.
I have a exactly same board (jasper 512 mb cb 6571) booting in less than 5 secs every time, but this one is driveing me crazy.

 

[freegetter]

try using diff route For underneath wires.

 

[avenged06x]

They can be tough. Good luck.

 

[seanr28]

post some pictures of soldering and cable routing.

I have done loads of BB japsers and ALL glitch, most instantly!

 

[bmonster007]

Bridge the 2 cap pads on the coolrunner revB, worked for me.