RGH Jasper 512

[ando2k9]

Dumped the nand twice using j-runner (64mb), installed xell got the cpu key created the nand flashed it using rawflash

rawflash was giving this error "0x2 block seems bad" it continued to write and finished and told me to shutdown, try to boot to the dash and get nothing on screen with the ROL blinking away and the CR flashes once as though it's glitched then nothing else.

I've checked the LDV all match fine, i've remade the nand a few times using autogg, j-runner and multibuilder all with the same symptomn and result.

Reflashed the original nand and it boots fine but now in the memory page the internal 512 is not listed

anyone any thoughts on this?

 

[esbmaepo]

Did you have any bad blocks in your original nand?

 

[ando2k9]

Did you have any bad blocks in your original nand?

none was noted in the logs, 360 flash tool does not display any either

just opened both image in xnandhealer just to double check and no bad blocks at all

 

[esbmaepo]

Have you tried creating image with noremap=true, and let Rawflash deal with bad block? Or thou there isn't any

 

[ando2k9]

Have you tried creating image with noremap=true, and let Rawflash deal with bad block? Or thou there isn't any

no never even knew that was a option, anyway just reflashed the created image using nandpro booted first time which is wierd.

plugged a usb pen and went to the memory settings it just seemed to keep searching, removed the stick and the Internal memory unit showed as unformatted formatted it and all good

strange that rawflash was giving problems, thread may help someone

 

[Hackerjac]

sounds like you are using rawflash 0.3, had that sane problem with that version