This is making me so freaking mad. Its so stupid. I finally get my glitchchip back from johnscrub (Thanks bro) and Ive been soldering, hot glueing, everything for awhile to get ready to do the RGH. I heat up my soldering iron and hot glue gun. I write my ecc file for my 512mb Jasper. Its on the beta dash, not official. One right before the official. Anyways, so away I go, I start soldering wire by wire. Hot glueing it down every so often and using tweezers to hold it in place. I finally get it, even the hardest place, perfectly. Turn it on with eject, and the green light pauses for a second, then starts blinking and throws out 0002. I turn it off, and it won't come back on. Period. Now it wont even detect to write/dump the nand. What do I do?! Its making me mad because its the last box I have that can be jtagged/reset glitched. I desoldered everything but my lpt cable and still nothing. OMFG. Anybody? If it makes any difference, latter on down the road I had a bad block that idk how to remap, but it turned on with the bad block. __________________
RGH Jasper 512mb Bad Nand/No Power?
- Thread starter aarongdl
- Start date
Goldensavage
VIP Member
It is best to post clear pics of your soldering so others can help you out.
Ensure they are not blurry if you can. Thanks
Ensure they are not blurry if you can. Thanks
At the moment I can assure my soldering is fine. It threw out 0002 error and now won't boot at all. I'm think it might be possible I burned the resistor by stby_clk or whatever. I can get a resistor from a dead board. Do all the resistor in the row with STBY_CLK have the same amount of ohms? If so, I may try to replace it, and power it on and check.
Post pics so we can see and help you out. It could be anything from bridged points, but pics will help
I dont have a camera at the moment, maybe tomorrow. Idk what it could be though. Its not a short, or else the psu would be red.
can i take a resistor off a dead board? is there a bigger one I can use or something? or will I need to buy one of these things? http://www.ebay.com/itm/33-Ohm-2-Wa...pt=Vintage_Electronics_R2&hash=item45ff4df2a4 Would radishack carry any of these things?