Jasper 512mb with a bad flash

[frazzeld]

im thinking about buying a Jasper 512mb dash below 7371 that supposedly has a bad flash....3RROD at the moment, the guy says that he has some good nand dumps, said that he flashed a modded flash at thats what gave him the 3RROD

Whats do you think chances are of recovering the unit?

Thanks for your help

 

[seanr28]

Jaspers can be a pain if incorrectly flashed with the wrong SMC, and you may need to short the nand in order to re-flash, that is worst case senario though!

As long as you definatley have a good nand dump and the board is not damaged due to porr soldering, you shoul dbe ok. I would want to see it first though!

 

[jtag360.nl]

You don't have short the nand because it still starts with RROD.
Just take the KV.bin and flash it into xell(free60).bin for the Jasper BigBlock.
Like this, nandpro free60.bin: -w16 kv.bin 1 1

Flash this to the nand with the Nandx, LPT or USB connection.

nandpro lpt: -w16 free60.bin 0 (I used LPT for exemple)

It's only 50 blocks, so that fast.

Take the power off for 30.sec.

Than start-up the Xbox, now it must boot into xell(free60).

After that you can flash XBR on it or your freeboot you made for this Xbox.

It's only