RGH Jasper BB CoolRunner not glitching, can't read nand & infinite boot with no RROD

[x64Architecture]

TX Product(s) used: J-R Programmer, CR3 Lite
Console Type: Jasper
NAND size: 512
Dashboard version: 2.0.13599
CB version: 6750
Screenshot of NAND details from J-Runner: here
J-Runner log: here
Image of Coolrunner:

Images of close-up soldering to motherboard:


Was the console working before you started: Y

Do you get a green debug light appear on the RGH chip every 4-5 seconds: N

How long is the light on for each time: no light

Description of problem:

Hey guys, this is my 3rd console that I have rghed, I had the RGH working I have the cpu key, original nand, etc. but I went to improve the boot times and I took off stby_clk and the resistor next to it and it wouldn't boot at all then I replaced the resistors with another Jasper BB's resistors now it try's to boot but doesn't glitch(green led) or allow me to read the nand. I think the issue is with stby_clk so some assistance would be appreciated. If you need more pics or details just post in this thread and i'll get it for you.

Answered

 

[BL4K3Y]

Re: Jasper BB CoolRunner not glitching, can't read nand & infinite boot with no RROD

What Ohm resistor did you use?

Is it properly soldered to both pads?

 

[playingmax]

Re: Jasper BB CoolRunner not glitching, can't read nand & infinite boot with no RROD

can you post pics of all points (glitch chip)

 

[x64Architecture]

Re: Jasper BB CoolRunner not glitching, can't read nand & infinite boot with no RROD

I just swapped the R4B24 resistor with a 33 ohm carbon fiber resistor and now the fans turn on and I got RROD once I think it was 0010 but now the rol board just keeps blinking but the fans work now, still cant read the nand and it wont glitch.

 

[Utmad]

Re: Jasper BB CoolRunner not glitching, can't read nand & infinite boot with no RROD

Complete the template to get support

TEMPLATE

 

[x64Architecture]

Re: Jasper BB CoolRunner not glitching, can't read nand & infinite boot with no RROD

Updated OP with all information, thank you Martin for giving me a second chance.

 

[Martin C]

Re: Jasper BB CoolRunner not glitching, can't read nand & infinite boot with no RROD

Take a better pic of the CR3-Lite please.

 

[x64Architecture]

Re: Jasper BB CoolRunner not glitching, can't read nand & infinite boot with no RROD

Better pic of the cr3 lite

 

[Martin C]

Re: Jasper BB CoolRunner not glitching, can't read nand & infinite boot with no RROD

Yes, you need someone to fix STBY_CLK for you.

best to post in the 'request a service or item'.