Jasper BB POST Output

K

KesKinG

Junior Member
Oct 20, 2013
11
0
Is there anything i can check for my Panic Output ?
Getting everytime : Post 84 - Panic - INSTRUCTION_STORAGE. On my Jasper Big Block 512MB.
But there is nothing i can read about, any1 knows which area i have to chek at this output ?
 
K

KesKinG

Junior Member
Oct 20, 2013
11
0
Re: CR3 Rater Output Helping List ?

If you want assistance on your R-JTAG installation, you MUST post complete the following fields:

Console Type: Jasper
NAND size: 512
Dashboard version: 16203
CB version: 6723
Screenshot of NAND details from J-Runner:
Version: 10
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 6723
Checking Console..
Version: 10
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 6723
Aud_Clamp Selected
R-Jtag Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_bigblock_aud_clamp.bin
Version: 10
Flash Config: 0x00AA3020
Writing Nand
jasper_hack_bigblock_aud_clamp.bin
J-Runner log:
POST output from J-Runner (either POST_OUT monitor or RATER output):
Post E8
Post 18 - FETCH_CONTENTS
Post 98 - Panic - NEXT_STAGE_SIZE
Post 58 - INIT_HYPERVISOR
Post D8 - RC4_DECRYPT_CB_B
Post 38 - SIG_VERIFY_4BL_CD
Post B8 - Panic - CF auth failed
Post 78 - INIT_STFS_DRIVER
Post 04
Post 84 - Panic - INSTRUCTION_STORAGE
Post 05
Post 08
Post 88 - Panic - PROGRAM
Post 48 - SHA_COMPUTE
Post C8 - SHA_VERIFY
Post 28 - FETCH_CONTENTS_3BL_CC
Post A8 - Panic - SIG_VERIFY_3BL_CC
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS
Post E8
Post 18 - FETCH_CONTENTS
Post 98 - Panic - NEXT_STAGE_SIZE
Post 58 - INIT_HYPERVISOR
Post D8 - RC4_DECRYPT_CB_B
Post 38 - SIG_VERIFY_4BL_CD
Post B8 - Panic - CF auth failed
Post 78 - INIT_STFS_DRIVER
Post 04
Post 84 - Panic - INSTRUCTION_STORAGE
Post 05
Shutdown
updflash.bin log (if applicable):
Image of R-JTAG board:
Images of close-up soldering to motherboard:
20131028_084530.jpg20131028_084624.jpg20131028_084648.jpg20131028_084656.jpg20131028_084704.jpg

Description of problem:
Cant get the Jasper to Glitch, the cycles are very slow. The green Led is blinking very short like 50 ms and then the Panic Output Storage comes.

Was the console working before you started: Y
There was a Problem of the DVD Drive standing open whenever the Xbox turns on . I couldnt see the Storage under Settings , the 512MB is coming from Jrunner, he autodetects it.
 
Factionwars

Factionwars

Noob Account
Oct 24, 2013
9
0
I have no idea why you are cutting of pieces of the QSB and using wires instead but you are missing a lot of points, for example the POST QSB needs the middle component. I think you should see a pro :p
 
K

KesKinG

Junior Member
Oct 20, 2013
11
0
I did it like on this picture from WIthout QSB Install. http://team-xecuter.com/forums/showthread.php?t=136034
http://team-xecuter.com/forums/attachment.php?attachmentid=17355&d=1370672237
I measure out the Resistors from the QSB but there is nothing going away, I thought it is to stabilize the QSB.
I didnt Solder it Backwards.... Hmm maybe the Picture is wrong ? Checked the Points on the Post QSB and on the RJTAG chip and it has the Continutiy. I also Messuered the the Post QSB points with powerup and all showing constant 27 Ohm but post 2 and 0 showing differnt values.
Ok Just found this ... http://team-xecuter.com/forums/showthread.php?t=136134 and your right .. i resolder and report back. THX
 
Last edited:
K

KesKinG

Junior Member
Oct 20, 2013
11
0
Got this now after changing Post QSB looks better now: :biggrin:
Post 1E - BRANCH
Post 22 - INIT_SECENG
Post 23 - INIT_SYSRAM
Post A2 - Panic - VERIFY_SECOTP_8
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 22 - INIT_SECENG
Post 23 - INIT_SYSRAM
Post A2 - Panic - VERIFY_SECOTP_8
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1E - BRANCH
 
K

KesKinG

Junior Member
Oct 20, 2013
11
0
It is booting now Post 6 was a cold soldering i retouched it and on dips 8,7,3 its boots into xell on first attempt ^^. Thx everyone. It glitches between instant and 3 attempts. This can be closed .
 
Last edited:
You must log in or register to reply here.