I have made another R-Jtag installation this time on Jasper BB (512MB) with DemoN. I thought I could share my experience with this fantastic piece of hardware which brought yet another "Perfecto" result.
Initial conditions for installation - Jasper BB (512MB) / DB 16537 / CB 6754
Used setup - Phat QSB V3 / R-JTAG V1.1 / AUD_CLAMP / DemoN FW 1.4
Wiring and DIP settings - reference wiring, ALT CPU_RST (R8C2) using standard blue wire
After some tweaking I found hot spot with the following settings on R-JTAG board - no voltage jumper / DIPs 3, 7, 8 = ON
At the end I have got fantastic booting console from both X360 and DemoN NAND.
Thanks the Team to make this possible!
Initial conditions for installation - Jasper BB (512MB) / DB 16537 / CB 6754
Used setup - Phat QSB V3 / R-JTAG V1.1 / AUD_CLAMP / DemoN FW 1.4
Wiring and DIP settings - reference wiring, ALT CPU_RST (R8C2) using standard blue wire
After some tweaking I found hot spot with the following settings on R-JTAG board - no voltage jumper / DIPs 3, 7, 8 = ON
At the end I have got fantastic booting console from both X360 and DemoN NAND.
Thanks the Team to make this possible!
