Re: Please help this new guy with an R-JTAG / Jungleflasher issue
TX Product(s) used: J-R Programmer, R-Jtag V1.1, X360usb Pro V2
Console Type: Jasper
NAND size: 16 GB
Dashboard version: Latest
CB version: 16487 (may need to edit once at home!)
Screenshot of NAND details from J-Runner: t.b.a.
(attach an image to your post)
J-Runner log: t.b.a.
updflash.bin log (if applicable):
Image of Coolrunner:N/A
Images of close-up soldering to motherboard: will update later today
(attach images to your post)
Description of problem: Flashed retail dash back to NAND - now only green flashing light on console with no boot?
Was the console working before you started: YES! Everything but a corrupt Liteon drive (PCB blown)
Do you get a green debug light appear on the RGH chip every 4-5 seconds: YES
How long is the light on for each time: 1-2 seconds
After making a "mess" of soldering in my nandx wiring (finally did it right), and writing bad blocks (Xell) on to my nand, my MOBO no longer had any power? I've restored power to the MOBO by reading, thanks guys, and bridging 44-47 leads to the nand via a flat head screwdriver. Following this, I thought I successfully wrote my retail nandbin.1 back to my Jasper, but after removing power from the console for 30+ seconds and trying to boot to the dashboard, all I get is a single center green flashing light on the console......and no boot! Can you help me with this Team? I've considered shorting the pins again and trying to boot again, but I'm a little leery of doing so! So, any suggestions as to what to do will be greatly appreciated. (I've disconnected my R-Jtag from 5v power through all of this cause I wanted nothing interfering with the writing back of the retail.....start fresh so to speak) HELP!
J.F.
Console Type: Jasper
NAND size: 16 GB
Dashboard version: Latest
CB version: 16487 (may need to edit once at home!)
Screenshot of NAND details from J-Runner: t.b.a.
(attach an image to your post)
J-Runner log: t.b.a.
updflash.bin log (if applicable):
Image of Coolrunner:N/A
Images of close-up soldering to motherboard: will update later today
(attach images to your post)
Description of problem: Flashed retail dash back to NAND - now only green flashing light on console with no boot?
Was the console working before you started: YES! Everything but a corrupt Liteon drive (PCB blown)
Do you get a green debug light appear on the RGH chip every 4-5 seconds: YES
How long is the light on for each time: 1-2 seconds
After making a "mess" of soldering in my nandx wiring (finally did it right), and writing bad blocks (Xell) on to my nand, my MOBO no longer had any power? I've restored power to the MOBO by reading, thanks guys, and bridging 44-47 leads to the nand via a flat head screwdriver. Following this, I thought I successfully wrote my retail nandbin.1 back to my Jasper, but after removing power from the console for 30+ seconds and trying to boot to the dashboard, all I get is a single center green flashing light on the console......and no boot! Can you help me with this Team? I've considered shorting the pins again and trying to boot again, but I'm a little leery of doing so! So, any suggestions as to what to do will be greatly appreciated. (I've disconnected my R-Jtag from 5v power through all of this cause I wanted nothing interfering with the writing back of the retail.....start fresh so to speak) HELP!
J.F.
