JTAG Jasper BigBlock problem

[[email protected]]

First of all. My friend got this thing preflashed with the old 8XXX dashboard. He did not get any data with this box so he does not have any original nand of his 512er Japser.

Xell won't show me any website when I type in the IP in Chrome. there is only a little text with a 404 error. But not the one like you see when there is no conection. The DHCP has created an ipadress.

Also I cannot see how that thing was soldered one point goes to the frontpanel (which must be Tray_Open) and one gets down under the board. the original aud_clamp seems to be not used on the upper side.

There are no solderpoints for the flashing and I dont have any cables to connect it to the nandx anymore.

I'm a bit afraid of just updating xell to get maybe a webpage which shows me the information and lets me download the kv etc.

I mean JTAGTool gives me the option to download a clean nand but that won't help without the data. Am I right?




Is there a way

1. to get the nand read through xell anyhow, so that I dont need the nandx cables.
2. can I see then which method was used (aud_clamp alternative and so on) when I got step 1.


I'm pretty sure I'm a bit f...ed here.

 

[jim li]

Is there a way

1. to get the nand read through xell anyhow, so that I dont need the nandx cables.
2. can I see then which method was used (aud_clamp alternative and so on) when I got step 1.





1. NO! you need the nandx to read the nand

 

[[email protected]]

ut even if I read the nand I don'T have an original nand like it was before the Freeboot. And I cannot use the nand for a newer freeboot version.

 

[Martin C]

Pics of the install please. Don't assume wiring as if you get it wrong, you won't be able to update from USB.

You can dump the NAND using Nandflasher 1.2 (google it!).

 

[[email protected]]

Well I dumped the nand now and tried to update it with Bestpigs toolbox. I flashed it back and now it seems that the console reboots (the fan is always spinning up and then for a millisecond spins down after a while)

The 360 flash Dump Tool says to me that the nand which I extracted has 6BL and 7BL Patch 0. After I used the bestpig tool the new nand got this info not. I can see the keys and so on but not the version of 6 and 7 BL.

Is this because I used a freeboot nand to create a new freeboot nand?