JASPER ELITE 16MB SB PROBLEM

A

ARUNCREATIONS

VIP Member
Oct 1, 2010
195
23
INCREDIBLE INDIA
www.facebook.com
Hai,

Just done jasper 512 two consoles and a falcon with rgh and everything is fine..But i have one jasper elite 16mb sb and i read nand through jtag tool with jasper 512mb settings.i got two 512mb nands and compared it ok without any errors..the CB version is 6751.When try to load xell it dosnt so i use 360_Multi_Builder_v0.7 to create xell and its load fine and got cpu key..jtag says its a wrong key(due to donar 6750 from multi builder)..how to fix this and create correct glitched image build and
1.how to flash my original nand to my xbox ( It is jasper elir 16mb SB but i reader 512mb)
2.How to match my 512mb nand to multibilder provided donar image

Help needed...Thanks:frown:

Sorry Admin for posting it in noob genral form
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
".jtag says its a wrong key(due to donar 6750 from multi builder)."

It says wrong key because you put it in wrong. The Donor CB 6750 has nothing to do with it.
 
A

ARUNCREATIONS

VIP Member
Oct 1, 2010
195
23
INCREDIBLE INDIA
www.facebook.com
Ok
From first

It is jasper elite black 16mb console WITH SB
But i thought it was jasper 512mb so i get nand with jtagtool with jasper 512mb settings instead of jasper 16mb settings.i got 2 512mb full nand read without any badblock and compared then to next step,here i create xell to get cpu key and flashed it on board i boot xbox360 with eject button nothing happens only green light blinks in coolrunner, so i make a ecc image with multibilder 0.7 with my nand it says cb version is 6751 and will use a donar 6750 kv it build a ecc image, i again flashed it to board and reboot now xellreloaded loads and capture my key with a camera nad also get my cpukey with XNandHealerGUI_0.74 through ip.Now with that key i tried to make a glitch image but jtagtool says the key is incorrect while verifing my original nand..
This is my problem...Please help..
 
You must log in or register to reply here.