jasper jtag 16mb wont boot help

[teh1337]

hello im new to jtagging and i was going to update my dash to 14699 so i can play the new saints row and mw3 so i tried to update it with xe build and as it told me to go in xbox 36 nand flasher i wrote my nand it said error then i dash boarded then i got e79 then e71 and i turned my jtag off then pulgged every thing out then back in 2x
then i got e79 and e71 now i just have a black screen no audio no vison its just tge green power button comes on no green start up rol and also my xell wont boot up i have my nand on my cd but what do i do with that to fix it can some one give me a full detailed vid so i can fix this problem

 

[TilVl]

If you tried to build your own sounds like a bad smc. You need a nand flasher and open up the xbox.
Find out what wiring method was used rebuilt image with correct SMC. Reflash Xell then proceed from there.


Sent from my SGH-T839 using Tapatalk

 

[teh1337]

thanks after i dool all that will it work fine

 

[TilVl]

Should. My experience with center green light always indicated something wrong with the nand build. Which was usually the SMC.

 

[teh1337]

can u give me a full tutorial

 

[Martin C]

Nobody can give you a tutorial for what to do. Besides, there are plenty out there already.

I'll give you some pointers though:

E79 - normally to do with SMC wiring configuration chosen.
E71 - bad blocks unmapped.

 

[cab0747]

Nobody can give you a tutorial for what to do. Besides, there are plenty out there already.

I'll give you some pointers though:

E79 - normally to do with SMC wiring configuration chosen.
E71 - bad blocks unmapped.

To go along with this: you will need to disassemble your console and figure out exactly what wiring configuration was used.

Once you have determined what points were used when wiring, you can then build your 14699 image using the correct points. After the correct points are specified within the program you are using to build your new NAND and you flash that NAND back to the console, you should be fine.

 

[keil423]

You are working with an actuall Jtag and not an RGH right. If you dont have xell anymore you will need to open it up and plug it into a nand flasher. If you lack the soldering skill required or dont have a nand x feel free to contact me to make shipping arrangements! I can have that old girl fixed up for you in no time.
I guess I should first ask where your located?