R-JTAG Jasper not booting XELL

Steveo2882

Noob Account
Dec 27, 2013
3
0
Console Type: Jasper

NAND size: 512

Dashboard version: 2.0.8955

CB version: 6750

Screenshot of NAND details from J-Runner:

J-Runner log:
===================================================
Saturday, February 15, 2014 1:01:56 PM

J-Runner v0.3 Beta (4) Started



Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 6750
Version: 10
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 6750
Jasper 512MB Manually Selected
Reading Nand to C:\Users\Steve\Downloads\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump1.bin
Reading Nand
Error: 250 reading block 250
Error: 250 reading block 258
Error: 210 reading block 259
Error: 210 reading block 25A
Error: 210 reading block 25B
Error: 210 reading block 25C
Error: 210 reading block 25D
Error: 210 reading block 25E
Error: 210 reading block 25F
Done!
in 13:57 min:sec

Reading Nand to C:\Users\Steve\Downloads\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Reading Nand
Jasper 512MB
RGH Selected
Nand Initialization Finished
Error: 250 reading block 250
Error: 250 reading block 258
Error: 210 reading block 259
Error: 210 reading block 25A
Error: 210 reading block 25B
Error: 210 reading block 25C
Error: 210 reading block 25D
Error: 210 reading block 25E
Error: 210 reading block 25F
Done!
in 13:57 min:sec

Reading Nand to C:\Users\Steve\Downloads\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump3.bin
Comparing...Takes a while on big nands
Reading Nand
Nands are the same
Error: 250 reading block 250
Error: 250 reading block 258
Error: 210 reading block 259
Error: 210 reading block 25A
Error: 210 reading block 25B
Error: 210 reading block 25C
Error: 210 reading block 25D
Error: 210 reading block 25E
Error: 210 reading block 25F
Done!
in 13:56 min:sec

Comparing...Takes a while on big nands
Nands are the same
Jtag Selected
R-Jtag Selected
Aud_Clamp Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_bigblock_aud_clamp.bin
Version: 10
Flash Config: 0x00AA3020
Writing Nand
jasper_hack_bigblock_aud_clamp.bin
Done!
in 0:18 min:sec

POST output from J-Runner (either POST_OUT monitor or RATER output):

updflash.bin log (if applicable):

Image of R-JTAG board:

Images of close-up soldering to motherboard:


Description of problem: Got 3 matching dumps. Direct wired into j2b1 (no qsb). Direct wired J-R Programmer also. Will not boot XELL. Depending on settings on board with dips and voltages either continual glitch or RROD with status 0010. Currently dips are 4,7,8 on, 1.8 voltage aud clamp set in middle with 470 jumper and 1 and 3 bridged. Both top and bottom CPU_RST tried. Resoldered connections maybe 3 or 4 times. Thought it maybe wasnt a good connection so added resistor legs to the through hole spots. Still nothing. Maybe someone can point me in the right direction here. Spent a good 12 hours on this thing. Thanks in advance!

Was the console working before you started: Y
 

Attachments

Steveo2882

Noob Account
Dec 27, 2013
3
0
Ohhhhh.... With all the reading I've done on all this I must have missed that part. Thanks. Ill try it later today