Jasper not booting

Fatfro

Junior Member
Jul 3, 2013
21
0
Hi guys!

I have a big block Jasper here (512mb) which is R-Jtagged. Well anyways, it's not booting anymore, even tough i used it yesterday. I have uploaded pictures of one of my qsbs and the chip below. I cant take a picture from under the board as one of the motherboard screws are stuck :facepalm:

Well anyways, the chip gets power just fine (lights up red), and i can see it's glitching, but it looks like it's giving up after three cycles. Also, im aware the 5v point is a little chubby done, as i had to use a wire from a old power supply, but it worked fine yesterday.

image (1).jpgimage.jpg
 
  • Like
Reactions: jaycethesniper

Fatfro

Junior Member
Jul 3, 2013
21
0
rater log?
Doesnt have access to a Jr Programmer for the moment (borrowed it), so i cant get one. Understood from Joesinger that it would be needed, so i can post one as soon as i get a hold of it. I got the rater log after installing, and it all looked fine then.

Also, cant stress enough that it worked like a boss yesterday booting under 10 seconds.