R-JTAG Jasper Will not boot xell

S

Shermo

Junior Member
Oct 22, 2013
10
0
Console Type: Jasper
NAND size: 16
Dashboard version: 2.0.16202

Screenshot of NAND details from J-Runner:
nand.png


J-Runner log:
Code: 
[B][B][B][B][B][B][B]Phat Selected
[/B][/B][/B][/B][/B][/B][/B]Version: 10
Power Up
Waiting for POST to change
Post 01 
Post 41 - VERIFY_OFFSET 
Post 01 
Post 61 - INIT_HAL_PHASE_0 
Post 01 
Post 41 - VERIFY_OFFSET 
Post 21 - INIT_SECOTP 
Post 41 - VERIFY_OFFSET 
Post 61 - INIT_HAL_PHASE_0 
Post 41 - VERIFY_OFFSET 
Post 71 - INIT_AUDIO_DRIVER 
Post 01 
Post 41 - VERIFY_OFFSET 
Post 61 - INIT_HAL_PHASE_0 
Post 41 - VERIFY_OFFSET 
Post 71 - INIT_AUDIO_DRIVER 
Post 01 
Post 41 - VERIFY_OFFSET 
Post 71 - INIT_AUDIO_DRIVER 
Post 41 - VERIFY_OFFSET 
Post 71 - INIT_AUDIO_DRIVER 
Post 41 - VERIFY_OFFSET 
Post 71 - INIT_AUDIO_DRIVER 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Most Fails(cumulative): 0xA0
Shutdown
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 12 - FSB_CONFIG_RX_STATE 
Post 15 - FETCH_OFFSET 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 60 - INIT_KERNEL 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 6B - INIT_SFC_DRIVER 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Most Fails(cumulative): 0xA0
Shutdown
Resetting................

Image of R-JTAG board:
IMG_0291.JPG

Images of close-up soldering to motherboard:
IMG_0282.JPGIMG_0284.JPGIMG_0285.JPGIMG_0286.JPGIMG_0287.JPGIMG_0289.JPG

Description of problem:

Cannot get it to boot to xell. Closest I have gotten it Dip setting 7,8 on obliviously and dip 2 on, it halts on Post 6D - INIT_KEY_EX_VAULT

All other dips and voltages produce Post A0 - Panic - VERIFY_SECOTP_6

Was the console working before you started: Y

Any help would be appreciated
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
1. Soldering needs major work. The GND cable to the R-JTAG is barely soldered.
2. Post your J-Runner output too. All required information is in the template.
 
S

Shermo

Junior Member
Oct 22, 2013
10
0
Code: 
Filechecks disabled - No Filechecks carried out


===================================================
01 November 2013 17:20:38


J-Runner v0.3 Beta (2) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Filechecks disabled - No Filechecks carried out
Jasper 16MB Manually Selected


===================================================
01 November 2013 17:24:30


J-Runner v0.3 Beta (2) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Filechecks disabled - No Filechecks carried out
Version: 01
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 6754
Jasper 16MB
Reading Nand to D:\Applications\Utlities\J-Runner v02 Beta (287) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 2:08 min:sec


Reading Nand to D:\Applications\Utlities\J-Runner v02 Beta (287) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Jasper 16MB
Reading Nand
Jtag Selected
Nand Initialization Finished
Done!
in 2:04 min:sec


Reading Nand to D:\Applications\Utlities\J-Runner v02 Beta (287) Core Pack\output\nanddump3.bin
Comparing...
Reading Nand
Nands are the same
Done!
in 2:04 min:sec


Reading Nand to D:\Applications\Utlities\J-Runner v02 Beta (287) Core Pack\output\nanddump4.bin
Comparing...
Reading Nand
Nands are the same
Done!
in 2:04 min:sec


Comparing...
Nands are the same
XeLL file created Successfully jasper.bin
Aud_Clamp Selected
R-Jtag Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_aud_clamp.bin
Version: 01
Flash Config: 0x00023010
Writing Nand
jasper_hack_aud_clamp.bin
Done!
in 0:10 min:sec




===================================================
gnd cable has now been sorted still get

Code: 
Power Up
Waiting for POST to change
Post 01 
Post 40 - Entrypoint of CD reached 
Post 40 - Entrypoint of CD reached 
Post 70 - INIT_VIDEO_DRIVER 
Post 40 - Entrypoint of CD reached 
Post 20 - CB entry point reached 
Post 40 - Entrypoint of CD reached 
Post 60 - INIT_KERNEL 
Post 40 - Entrypoint of CD reached 
Post 20 - CB entry point reached 
Post 40 - Entrypoint of CD reached 
Post 60 - INIT_KERNEL 
Post 40 - Entrypoint of CD reached 
Post 20 - CB entry point reached 
Post 40 - Entrypoint of CD reached 
Post 60 - INIT_KERNEL 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 42 - FETCH_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 6B - INIT_SFC_DRIVER 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Shutdown
 
Taijigamer2

Taijigamer2

VIP Member
Jun 8, 2013
1,292
0
England
Could be the Aud clamp wiring as its getting to post 60 and then stopping. Op I would suggest using the Tx jtag qsb with Aud clamp selected as it is a clean and reliable install.
 
S

Shermo

Junior Member
Oct 22, 2013
10
0
no it doesn't, doesn't even turn on :facepalm:


EDIT i have the v2 board just went this way as i wouldn't be able to install the extreme xecuter rrod kit (THis box has never rrod btw just precaution) I will try the qsb and see if that does anything
 
Last edited:
S

Shermo

Junior Member
Oct 22, 2013
10
0
ok so ive taken everything off but left post out qsb on, booting fine now, so the only things that caused it was 5v, ground & nand-x read wires. Should i try some alt 5v & ground points?
 
S

Shermo

Junior Member
Oct 22, 2013
10
0
Martin C said:
I think you should get a multimeter and check your voltages.
Click to expand...

Sorry if i sound dull but what points


i have re soldered everything back now get this

Code: 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6E - INIT_SETTINGS 
Post 6F - INIT_POWER_MODE 
Post 70 - INIT_VIDEO_DRIVER 
Post 71 - INIT_AUDIO_DRIVER 
Post 73 - INIT_SATA_DRIVER 
Post 75 - INIT_DUMP_SYSTEM 
Post 77 - INIT_OTHER_DRIVERS 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Shutdown
 
B

blasler

Full Member
Apr 12, 2010
39
0
i have same xbox 360 with same CB and dashversion, dosent boot xell, i flash back the stock nand and now give me error 0022 after 5 sec on..... what can be, and how i fix it ? thaks
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
blasler said:
i have same xbox 360 with same CB and dashversion, dosent boot xell, i flash back the stock nand and now give me error 0022 after 5 sec on..... what can be, and how i fix it ? thaks
Click to expand...
Start your own thread please.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Shermo said:
Sorry if i sound dull but what points


i have re soldered everything back now get this

Code: 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6E - INIT_SETTINGS 
Post 6F - INIT_POWER_MODE 
Post 70 - INIT_VIDEO_DRIVER 
Post 71 - INIT_AUDIO_DRIVER 
Post 73 - INIT_SATA_DRIVER 
Post 75 - INIT_DUMP_SYSTEM 
Post 77 - INIT_OTHER_DRIVERS 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Shutdown
Click to expand...
Is that with your original NAND written back?
 
S

Shermo

Junior Member
Oct 22, 2013
10
0
Martin C said:
Is that with your original NAND written back?
Click to expand...

no hacked nand, however after the first time it hasn't done it again. dip 2,7,8 seems to be the only one that gets near, so i will continue playing see if i can get it booted

and no nothing was on screen when Post 79 - LOAD_XAM i have vga cable that i will be using in future using hdmi before
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
You're looking for the RoL to cycle and the debug light to be permanently on. Then you'll know it's booted to XeLL.

Keep trying with those settings.
 
  • Like
Reactions: Shermo
You must log in or register to reply here.