R-JTAG Jasper wont glitch or boot Xell

F

fokeiro

Senior Member
Feb 1, 2010
125
0
MIAMI, FLORIDA
Console Type: (Jasper)
NAND size: 16
Dashboard version: 2.0.16537
CB version: 6754


Was the console working before you started: Y


Im working on this jasper 16mb ( first timer ) but for some reason it just stay like starting to boot, green light flashing , not even RROD, now if i take out the 5v cable and flash retail nand it boots fine, i have tried aud_clmap , no aud_clamp , diferent dips combinations, but it seems to me like it never actually boot since i dont even get rrod just a flashing green lite ( no dvd drive on it now)

shot1.jpg

right now using Dips 7, 8, 3 and trust me i have tried everything.

My Rater Screenshot.png


Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 1A - RC4_INITIALIZE
Post 1A - RC4_INITIALIZE
Post 18 - FETCH_CONTENTS
Post 10 - Payload/1BL started
Post 3A - BRANCH
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 01
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 01
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 0C
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 01
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 04
Post 1D - SIG_VERIFY
Post 0C
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 04
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 0C
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 1D - SIG_VERIFY
Post 15 - FETCH_OFFSET
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 1E - BRANCH
Post 1E - BRANCH
Post 1E - BRANCH
Post 1E - BRANCH
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 0C
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 18 - FETCH_CONTENTS
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 1D - SIG_VERIFY
Post 01
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 01
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 10 - Payload/1BL started
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 01
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 04
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 15 - FETCH_OFFSET
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Post 1D - SIG_VERIFY
Click to expand...
and then repeat and repeat then shut down

this is my soldering i know is not the best
20131116_215022.jpg

20131116_214951.jpg20131116_2149430.jpg
20131116_214943.jpg
20131116_214745.jpg
20131116_214728.jpg20131116_214711.jpg
20131116_171923.jpg
 
F

fokeiro

Senior Member
Feb 1, 2010
125
0
MIAMI, FLORIDA
i tried 7,8 on all the time and all of them the rest one by one, when i run Rater sometimes i get RROD or sometimes it just shutdown


with default voltage i get this too

Post A0 - Panic - VERIFY_SECOTP_6


with v1.8 i dont
 
Last edited:
chase

chase

VIP Member
Apr 11, 2004
1,073
28
Toronto, Canada
is the post_7 quick solder point on the post qsb burnt or is that flux ?

if this was my console, I would touch up some of the soldering.. they look dry

also, have you tried all dip options with all 3 voltage settings ?

RROD is normal until you reach optimal setting
 
F

fokeiro

Senior Member
Feb 1, 2010
125
0
MIAMI, FLORIDA
yeah its flux im not very skill on soldering so im afraid to mess them up...so rrod in rater is normal but what about when it jist turn off and is this rater log normal or maybe something wrong
 
chase

chase

VIP Member
Apr 11, 2004
1,073
28
Toronto, Canada
fokeiro said:
yeah its flux im not very skill on soldering so im afraid to mess them up...so rrod in rater is normal but what about when it jist turn off and is this rater log normal or maybe something wrong
Click to expand...
post output is wrong.. can be due to soldering or dip settings.. i would first make sure the soldering is near perfect then i would mess around with dips
 
F

fokeiro

Senior Member
Feb 1, 2010
125
0
MIAMI, FLORIDA
i just check the soldering even under a signifying glass to make sure and looks good all the points, at least nand write/read works perfect, so which pieces should u double check the soldering , the ones in the bottom ?
 
hersheys247

hersheys247

VIP Member
Dec 25, 2011
1,128
88
Detroit area, MI, USA
Redo ur post out solder points.

Sent from my Brain Tumor causing device using Tapatalk 2
 
V

Vermy

Junior Member
Sep 17, 2011
18
1
America
Hey, I'm on my first one too, and having similar troubles not even getting xell yet, but haven't tried all aud_clamp dips yet (plus, I wasn't aware you should try 3V too). But I did notice on the jrp/nandx/cr qsb that it looks like the brown and green wires aren't in the right spots... Unfortunately, I have no idea if that could cause you particular issue. :)
 
You must log in or register to reply here.