RGH Jaspwer 512Mb RGH2 0022 Error on stock nand

wartog

Full Member
Jun 11, 2010
82
0
Nowhere
Hi guys,

RGH2 on Jasper 512 MB was glitching with few DBG LED blinks and then blank with no Xell on screen and an increase in Fan speed.
Hence reverted back to stock nand and now the console is going into RROD with Secondary Error code 0022 after 30 seconds or so.
Tried erasing the first 50 blocks and rewriting with the original nand and no luck the console wont go back to stock nand . All soldered wiring has been removed .

Any Suggestion guys?

J runner Log
Pics http://postimg.org/gallery/2noqesge/
Second Set of pics-- http://postimg.org/gallery/5z3g7u06/
Capture.PNG
===================================================
Saturday, October 19, 2013 11:18:01 PM

J-Runner v0.3 Beta (2) Started



Checking Files
Finished Checking Files
Checking Console..
Version: 03
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 6754
Version: 03
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 6754
Jasper 512MB Manually Selected
Reading Nand to F:\xbox\RGH\jrunner\output\nanddump1.bin
Reading Nand
Done!
in 8:00 min:sec

Reading Nand to F:\xbox\RGH\jrunner\output\nanddump2.bin
Initializing nanddump1.bin..
Jasper 512MB
Reading Nand
Jtag Selected
Nand Initialization Finished
Done!
in 7:59 min:sec

Comparing...Takes a while on big nands
Nands are the same
Comparing...Takes a while on big nands
Nands are the same
RGH2 Selected
Comparing...Takes a while on big nands
Nands are the same
Jasper 512MB Manually Selected
ECC created
Jasper 512MB Manually Selected
Version: 03
Flash Config: 0x00AA3020
Writing Nand
image_00000000.ecc
Done!
in 0:09 min:sec

Programming Coolrunner
F:\xbox\RGH\jrunner\common\xsvf\falconrgh2.xsvf
Version: 03
Flashing F:\xbox\RGH\jrunner\common\xsvf\falconrgh2.xsvf to CoolRunner
Input Filesize: 593E
Output Filesize: 2C82
Failed with 0x0002 status!

Programming Coolrunner
F:\xbox\RGH\jrunner\common\xsvf\falconrgh2.xsvf
Version: 03
Flashing F:\xbox\RGH\jrunner\common\xsvf\falconrgh2.xsvf to CoolRunner
Input Filesize: 593E
Output Filesize: 2C82
Failed with 0x0002 status!

Programming Coolrunner
F:\xbox\RGH\jrunner\common\xsvf\falconrgh2.xsvf
Version: 03
Flashing F:\xbox\RGH\jrunner\common\xsvf\falconrgh2.xsvf to CoolRunner
Input Filesize: 593E
Output Filesize: 2C82
Done!

Programming Coolrunner
F:\xbox\RGH\jrunner\common\xsvf\falconrgh2.xsvf
Version: 03
Flashing F:\xbox\RGH\jrunner\common\xsvf\falconrgh2.xsvf to CoolRunner
Input Filesize: 593E
Output Filesize: 2C82
Done!

Jasper 512MB Manually Selected
ECC created
Checking Console..
Version: 03
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 03
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 9188
Trinity
Version: 03
Flash Config: 0x00AA3020
Writing Nand
image_00000000.ecc
Done!
in 0:09 min:sec

Glitch2M Selected
Glitch2M de-Selected
Checking Console..
Version: 03
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 9188
Trinity
Jasper 512MB Manually Selected
Checking Console..
Version: 03
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 9188
Trinity
Jasper 512MB Manually Selected
Jasper 512MB Manually Selected
ECC created
Initializing nanddump1.bin..
Jasper BB
Jtag Selected
Nand Initialization Finished
Comparing...Takes a while on big nands
Nands are the same
RGH2 Selected
RGH Selected
Jasper 512MB Manually Selected
ECC created
RGH2 Selected
Jasper 512MB Manually Selected
ECC created
Initializing nanddump1.bin..
Jasper BB
Comparing...Takes a while on big nands
Jtag Selected
Nand Initialization Finished
Nands are the same
Jasper 512MB Manually Selected
Version: 03
Flash Config: 0x00AA3020
Writing Nand
nanddump1.bin
Done!
in 7:34 min:sec

Comparing...Takes a while on big nands
Nands are the same
Initializing nanddump1.bin..
Jasper 512MB
Nand Initialization Finished
Checking Console..
Version: 03
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 6754
Initializing nanddump1.bin..
Jasper BB
Nand Initialization Finished
Comparing...Takes a while on big nands
Nands are the same
Jasper 512MB Manually Selected
Version: 03
Flash Config: 0x00AA3020
Writing Nand
nanddump1.bin
Done!
in 7:34 min:sec

Version: 03
Flash Config: 0x00AA3020
Writing Nand
nanddump1.bin
Done!
in 0:09 min:sec
 
Last edited:

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
Did you by chance read the nands through twice (saving the ecc written nand over the original)? And yes, you'll need to post pics of what you have.

Also, you have a lot of errors spitting out in your log, which tells me the install was not up to snuff.
 
Last edited:

wartog

Full Member
Jun 11, 2010
82
0
Nowhere
nope only saved the Nand twice that was before writing the Ecc and didnt dump any nand later. I also have a complete 512 Mb dump of the Nand.

Link to thr Pics Added to the initial post of this thread Sorry Had missed those.
 

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
nope only saved the Nand twice that was before writing the Ecc and didnt dump any nand later. I also have a complete 512 Mb dump of the Nand.

Link to thr Pics Added to the initial post of this thread Sorry Had missed those.
Well, can't tell much with those pics. And what's up with the leads on your JRP/Nand-x? They are super long. Images are too dark to tell what's going on.

Have you reinstalled your programmer? First priority is getting it to boot stock, so hook back up the JRP/Nand-x and take better pics of the install (more light).
 

wartog

Full Member
Jun 11, 2010
82
0
Nowhere
i wrote back the original nand back to the console and then i got the RROD with 0022 error.

sorry I will post better images again later late Night
 

wartog

Full Member
Jun 11, 2010
82
0
Nowhere
Hi sorry back again with better pics I am using Nand X-
pics are uploaded hear http://postimg.org/gallery/5z3g7u06/

Yes i installed my progammer Nand X wrote back the Nand dump and then try booting the console it goes into RROD after 30-40 seconds giving 0022 error code.

inorder to glitch the console i was using a CR3 lite and also tried the Coolrunner RevC both glitch and then stop glitching and no xell. this is when i rewrote my orignal dump back to the console and got an RROD.
 

Moroccain

VIP Member
Oct 11, 2011
256
23
hi wartog iam sorry for ur xbox but its gone u can do nothing for him its dead i have the same problem with a jasper and i search in the net i found that i cant give him life no one know this problem came from
 
Last edited:

wartog

Full Member
Jun 11, 2010
82
0
Nowhere
hi wartog iam sorry for ur xbox but its gone u can do nothing for him its dead i have the same problem with a jasper and i search in the net i found that i cant give him life no one know this problem came from
SO even if we Rjtag the console cant it be recovered?? in any ways.
 

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
SO even if we Rjtag the console cant it be recovered?? in any ways.
Don't listen to him. Hook up the NAND-x and take good pics of it installed. Try to write back your retail NAND and post your jrunner log.

If you still have your original NAND, you probably just screwed up somewhere along the way.


Sent from my iPhone using Tapatalk - now Free
 

wartog

Full Member
Jun 11, 2010
82
0
Nowhere
Don't listen to him. Hook up the NAND-x and take good pics of it installed. Try to write back your retail NAND and post your jrunner log.

If you still have your original NAND, you probably just screwed up somewhere along the way.


Sent from my iPhone using Tapatalk - now Free
Hi Brock have re worte the nand as asked and hear are the pics and Logs Still no luck getting RROD and secondary error code 0022.

Pics http://postimg.org/gallery/7isjz8bq/

Capture1.PNG

Logs
===================================================
Sunday, October 20, 2013 11:44:23 PM

J-Runner v0.3 Beta (2) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Initializing nanddump1.bin..
Jasper BB
Finished Checking Files
Jtag Selected
Nand Initialization Finished
Checking Console..
Version: 03
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 6754
Retail Selected
Jasper 512MB Manually Selected
Version: 03
Flash Config: 0x00AA3020
Writing Nand
nanddump1.bin
Done!
in 7:27 min:sec
 

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
Can you post a better pic of where you had CPU_RST soldered to when you had the coolrunner installed? (the blue wire)
 

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
Measure resistance across here and report back.

20131020_033522 (1).jpg
 
Last edited:

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
1.195 M omhs
Recheck the pic for where to measure.

Anyway - not sure what to tell you. Soldering needs a bit of work. It looks like you left the iron on those spots a bit too long, so it's possible one of the pads has lifted (can't tell from just the pics).
 

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
33 ohm.
 
Last edited:

wartog

Full Member
Jun 11, 2010
82
0
Nowhere
the value between the resistor is 33.2 ohm and the pad is intact as i checked the continuity between the Pad and the resitor the connection is good.