LITEON DG-16D2S JF no longer detecting drive after failed erase

C

CrashanBurn

Full Member
Mar 3, 2012
41
0
I wanted to flash a D2S today.
Read out the key went fine.
Then after everything was loaded up and i attempted to erase the drive.
It failed, and suddenly the drive was gone.
Now it won't detect the drive anymore.
Will not open up either when i try to open it with CK3.

Followed the guide step by step, but on the erase part it went wrong.
Even though i did exactly as said.

I am guessing the drive is bricked.
 
C

CrashanBurn

Full Member
Mar 3, 2012
41
0
Do i got set the Source and Target files first at Firmware TOOL 32?
Since those are empty, after i did a reboot.
 
C

Chris_S

Full Member
Jan 12, 2012
41
0
CrashanBurn said:
Do i got set the Source and Target files first at Firmware TOOL 32?
Since those are empty, after i did a reboot.
Click to expand...
What? They will be empty since you erased the drive and there is no longer FW on it. As stated intro your drive from the MTK Flash 32 tab and write the FW as normal.
 
C

CrashanBurn

Full Member
Mar 3, 2012
41
0
Must be doing something wrong.
When i hit intro/device ID i just get a "device intro failed" error after a few minutes of trying.
FWTool32 files are loaded.

Just noticed also that my CK3 Mini wont stay on, when the drive is connected.
When i disconnect the power cable from the dvd to the ck3 it turns on.
But once plugged back in the green light goes back out again.
When i turn it on/off you see the green light blink once and thats it.
 
C

CrashanBurn

Full Member
Mar 3, 2012
41
0
Tried that a minute ago.
Drive returned Status 0x80
....................
Device Intro failed!

Which was the same error when i tried the very first time after reading out the key.
 
Netkar

Netkar

VIP Member
Apr 27, 2005
389
33
are you using x360usb pro? ck3i?
 
C

CrashanBurn

Full Member
Mar 3, 2012
41
0
Yeah X360 USB Pro, CK3 mini and the probe 3

---------- Post added at 11:20 ---------- Previous post was at 11:17 ----------

Is it normal for the CK3 Mini to be turned off(or appears to be at least).
When i power cycle it, i can see the green led go on for 1 sec and back off.

Waiting 5 sec between on/off is not working either.
 
C

cunny

VIP Member
Mar 8, 2009
313
0
North England
Ensure usb only is ticked (if using usb pro) if not select correct port.
Re intro drive.
power cycle (turn off the drive and back on)

It should be back with status 0x72 vendor mode.

A copy of your jungleflasher logs would be helpfull also if that fails. Could also try another sata lead
 
C

CrashanBurn

Full Member
Mar 3, 2012
41
0
Yeah i think it goes wrong because the CK3 mini is not staying powered on.
I honestly did not pay attention if it did that the first time also when i did the very first erase.
But i know for a fact that it did not go OFF during the key extraction.
Flashed a other LT few weeks ago and had no problems with it.

It's powered by the Molex power supply.
Tried a little cable without the probe in between.
But gave the same problem, CK3m turning on/off.
Only does it when the drive is connected, as soon as i unplug it its turned on again.
 
C

CrashanBurn

Full Member
Mar 3, 2012
41
0
This is all i got from logs, for some reason the original ones from the first attempt did not save.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Fri Mar 30 20:25:39 2012

This is a Wow 64 process running on 8 x 64 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 0 Com Ports.
Found 8 windows drives C: D: E: F: G: H: J: K:
Found 2 CD/DVD drives G: K:

Loading firmware file C:\Users\Administrator\Desktop\JungleFlasher v0.1.92 Beta (304)\DriveKeys\S.D Liteon\Dummy.bin
MD5 hash: 6915c4b875863b0d765b42eb6eee3fc5
Inquiry string found
Identify string found
Drive key @ 0xA030 5054810B13F7CA489124033976E846ED
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Auto-Loading firmware file C:\Users\Administrator\Desktop\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0251-v3.0.bin
MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied

Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!
Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro:
.............................................................................................................................................................................................................................................................................................................................................
Aborted by User!
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
PortIO unloaded.

Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!


Gonna try a different SATA cable, but don't think that works.
Since the CK3 Mini stays off when i unplug the current one.
Only when unplugging the power cable does it go back on.

---------- Post added at 11:51 ---------- Previous post was at 11:44 ----------

Different sata does not work either.
One thing i did notice was when i leave the power cable unplugged longer it stays on longer also.
But not long enough to do the whole procedure.
 
You must log in or register to reply here.