I have searched for a solution before posting... I can't find anything that is helping me fix this.
I have a 0225 Trinity that I bought without a DVD drive in it. The previous owner messed up the drive while trying to do the Kamakazi on it as well as RGH it. I was able to RGH it and get the CPU key and DVD key off of it.
I was able to extract the C-R.bin and key.bin out of the NAND as well.
It is currently on a really old dash. Is on 13599.
I wanted to get this back to stock with a DVD drive. I have a spare drive for it and just got my LTU2 board today.
I am using the most recent version of JF. Is v0.1.96 Beta (323).
I am doing this on my laptop via a Windows 7 virtual machine. (Windows 8 is the host OS)
I am using a USB Pro V1 and CK3 mini for power. Am powering via molex from my desktop PC.
Now that all of that info is out of the way...
I am able to get the LTU2 board into vendor mode with ease. I am able to build the FW image with ease. But when I attempt to write it, it writes to all 4 banks and then returns "Write Verify Failed".
I still have been sending the Outro command as well as locking via SPI and with the physical switch on my PCB.
The console boots without the drive just fine... other than the middle light flashes green because there is no drive detected.
But when I attach the disk drive, it will not boot up to the dash. Screen stays black and then the center light starts flashing.
This tells me that the FW is not writing correctly (at least, I think that's the case).
Here are my JF logs:
**********************************
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.96 Beta (323)
Session Started Fri Dec 27 20:58:50 2013
This is a Wow 64 process running on a 64 bit CPU
X360USB PRO detected, Version 0.18
New CD/DVD detected.
Found drive A: - Removable.
Found drive C: - Hard Drive.
Found drive D: - CD/DVD.
Found drive E: - Removable.
Found drive F: - Removable.
No Hitachi drives were found!
portio64.sys Driver not Installed
Found 1 I/O Ports.
Found 2 Com Ports.
Found 5 windows drives A: C: D: E: F:
Found 1 CD/DVD drives D:
Loading firmware file C:\Users\Me\Desktop\Xbox\JungleFlasher v0.1.96 Beta (323)\firmware\LTU2-0225-v1.0.bin
MD5 hash: d6ab7ccd7bbc1301762e6eff602afac3
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LTU2 v1.0
re-parseing file
Loading firmware from buffer
Drive key @ n/a XXXXXXXXXXXXXXXXXXXXXXXXXXX
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LTU2 v1.0
Stage 1 failed
Key Verification Failed !!
Additional extracts not completed.
Target f/w saved as: Restore2Stock.bin
XECUTER X360USB PRO removed.
XECUTER X360USB PRO attached.
Drive is Slim Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x90
Re-sending Vendor Intro:
.............
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ..Write Verify Failed !
Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On..
*****************************************
Any and all help is much appreciated!
Thanks!
I have a 0225 Trinity that I bought without a DVD drive in it. The previous owner messed up the drive while trying to do the Kamakazi on it as well as RGH it. I was able to RGH it and get the CPU key and DVD key off of it.
I was able to extract the C-R.bin and key.bin out of the NAND as well.
It is currently on a really old dash. Is on 13599.
I wanted to get this back to stock with a DVD drive. I have a spare drive for it and just got my LTU2 board today.
I am using the most recent version of JF. Is v0.1.96 Beta (323).
I am doing this on my laptop via a Windows 7 virtual machine. (Windows 8 is the host OS)
I am using a USB Pro V1 and CK3 mini for power. Am powering via molex from my desktop PC.
Now that all of that info is out of the way...
I am able to get the LTU2 board into vendor mode with ease. I am able to build the FW image with ease. But when I attempt to write it, it writes to all 4 banks and then returns "Write Verify Failed".
I still have been sending the Outro command as well as locking via SPI and with the physical switch on my PCB.
The console boots without the drive just fine... other than the middle light flashes green because there is no drive detected.
But when I attach the disk drive, it will not boot up to the dash. Screen stays black and then the center light starts flashing.
This tells me that the FW is not writing correctly (at least, I think that's the case).
Here are my JF logs:
**********************************
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.96 Beta (323)
Session Started Fri Dec 27 20:58:50 2013
This is a Wow 64 process running on a 64 bit CPU
X360USB PRO detected, Version 0.18
New CD/DVD detected.
Found drive A: - Removable.
Found drive C: - Hard Drive.
Found drive D: - CD/DVD.
Found drive E: - Removable.
Found drive F: - Removable.
No Hitachi drives were found!
portio64.sys Driver not Installed
Found 1 I/O Ports.
Found 2 Com Ports.
Found 5 windows drives A: C: D: E: F:
Found 1 CD/DVD drives D:
Loading firmware file C:\Users\Me\Desktop\Xbox\JungleFlasher v0.1.96 Beta (323)\firmware\LTU2-0225-v1.0.bin
MD5 hash: d6ab7ccd7bbc1301762e6eff602afac3
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LTU2 v1.0
re-parseing file
Loading firmware from buffer
Drive key @ n/a XXXXXXXXXXXXXXXXXXXXXXXXXXX
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LTU2 v1.0
Stage 1 failed
Key Verification Failed !!
Additional extracts not completed.
Target f/w saved as: Restore2Stock.bin
XECUTER X360USB PRO removed.
XECUTER X360USB PRO attached.
Drive is Slim Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x90
Re-sending Vendor Intro:
.............
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ..Write Verify Failed !
Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On..
*****************************************
Any and all help is much appreciated!
Thanks!
