ANSWERED JR Programmer faulty?

[MrLBX]

So i was writing my retail nand to my xbox and it wrote fine, but then i go to turn xbox on and it has no power and now i find that the JR programmer was become faulty too!, is goes into and out of bootloader but doesn't show the green light on the other mode, everytime i reset the red flashes which is really odd and no green.

is there warranty on this thing as i only bought it a few days ago!

 

[LoneWolf913]

Have you tried reflashing the firmware to the programmer? Talk to your reseller about a warranty, TX doesn't deal with end users, only distributors.

 

[BraveH43]

Have you tried reflashing the firmware to the programmer? Talk to your reseller about a warranty, TX doesn't deal with end users, only distributors.

Sound advice - reflash the fw on the jrp!

Download:

• FW for the J-R Programmer

you can use the update jr-p firmware option from tools menu in j-runner.

only time i ever seen the fw wiped/corrupted was a short in nand wires.
Check your solder points again before connecting jr-p to nand again

 

[MrLBX]

Have you tried reflashing the firmware to the programmer? Talk to your reseller about a warranty, TX doesn't deal with end users, only distributors.

Sound advice - reflash the fw on the jrp!

Download:

• FW for the J-R Programmer

you can use the update jr-p firmware option from tools menu in j-runner.

only time i ever seen the fw wiped/corrupted was a short in nand wires.
Check your solder points again before connecting jr-p to nand again

sorry guys, maybe im not explaining it clearly.

When the JR programmer is in programmer mode there are no lights on & when i press reset the red led just flashes, hence why my computer will not recongize that anything is connected.

It still works fine in going into and out of bootloader.

 

[BraveH43]

you explained it perfectly - hence why im saying to reflash the fw on the jr-p - thats what the bootloader mode is for!

 

[MrLBX]

you explained it perfectly - hence why im saying to reflash the fw on the jr-p - thats what the bootloader mode is for!

OH Thanks soooo much I did not know what bootloader was for, because when i first programmed it, it was in device manager and was detected so there was no need for bootloader.

Anyways thanks again,

 

[BraveH43]

OH Thanks soooo much I did not know what bootloader was for, because when i first programmed it, it was in device manager and was detected so there was no need for bootloader.

Anyways thanks again,

to explain it fully
move switch and press reset - to enable bootloader
tool > update JR-P firmware
give it the .hex file i linked previously
whilst its writing move switch back
it should then reset itself once the fw write is verified!

 

[MrLBX]

to explain it fully
move switch and press reset - to enable bootloader
tool > update JR-P firmware
give it the .hex file i linked previously
whilst its writing move switch back
it should then reset itself once the fw write is verified!

Yes got it back working now!

cheers