jrunner help-jasper recognized as zephyr

C

ChefBoyArDizzl

Full Member
Mar 8, 2012
50
0
Please help me. I am triing to use jrunner for the first time. I have updated it to the newest build and have net framework 4 installed. I have read the nand twice and they match. My problem is that jrunner thinks my mobo is a zephyr, but when i look at the power socket in the back its the jasper one. It has no onboard memory so its the small block one. This was a red ringed box that i repaired and came with no power supply. Both power supply that i have say 203 watt output. Is this why jrunner is recognizing the board as a zephyr? How would i change it to recognize it as a jasper? Would it be safe to flash coolrunner as is. I have nand x v3 programming over usb. I wanted to post this in the jrunner section but i am new to the site.

Also i would just assume use jtag tool, but it seems the tech-modz site is down for the last couple of days. does anyone have a link or know when it might be up again?
 
Last edited:
C

ChefBoyArDizzl

Full Member
Mar 8, 2012
50
0
@Mikaz
According to the picture you posted, it is jasper
HDMI and 2 pins at the top

---------- Post added at 16:08 ---------- Previous post was at 16:05 ----------

originally posted by krypt1c
I had what i thought was a jasper , going by the power connector , but it turned out to be a falcon.

So do you think jrunner knows the right mobo? and would it be safe to program the coolrunner and continue?
 
krypt1c

krypt1c

VIP Member
May 23, 2010
974
48
Nottingham
I did mine as it said (falcon) and all was well , but it`s up to you , i dont want to be held responsible if things go tits up.load your nand in XNandHealer and see what that says , as that`s the program i used when i did mine. :smile:
ChefBoyArDizzl said:
@Mikaz
According to the picture you posted, it is jasper
HDMI and 2 pins at the top

---------- Post added at 16:08 ---------- Previous post was at 16:05 ----------

originally posted by krypt1c
I had what i thought was a jasper , going by the power connector , but it turned out to be a falcon.

So do you think jrunner knows the right mobo? and would it be safe to program the coolrunner and continue?
Click to expand...
 
  • Like
Reactions: ChefBoyArDizzl
C

ChefBoyArDizzl

Full Member
Mar 8, 2012
50
0
krypt1c said:
I did mine as it said (falcon) and all was well , but it`s up to you , i dont want to be held responsible if things go tits up.load your nand in XNandHealer and see what that says , as that`s the program i used when i did mine. :smile:
Click to expand...

Thanks for the advice. I am trying to look at motherboard pics right now on google. From what i can tell the board is def not jasper. but the power connector on the back is. So looking at the power connector is not a sure thing as far as determining the mobo, I guess Jrunner knows best
 
C

ChefBoyArDizzl

Full Member
Mar 8, 2012
50
0
ok. So This is NOT a Problem with jrunner after all. Ifound these pics that compare motherboard pics
http://www.se7ensins.com/forums/threads/how-to-tell-what-motherboard-your-xbox-has.136432/
So my advice to anyone would be that you cant always go by the power connector socket alone.
P.S. Im glad that my jtag tool needed update and the website was down. I would've unknowingly followed the pictures and programmed my coolrunner with jasper files. Jrunner looks like a better program anyways.

This problem is solved. my motherboard is confirmed Zephyr.
 
  • Like
Reactions: stefanounick and krypt1c
J

Justice1231

VIP Member
May 4, 2011
1,005
0
Adelaide, Australia (down south)
you will be surprised at what lengths people will go to, to try and get an alternate power supply to work, there was a threat about 2 months ago where some thought they had a falcon, turns out the previous owner had broke of the centre pin on the powersupply of the to get the 175w powersupply to work, his mobo was an xenon
 
You must log in or register to reply here.