RGH Jrunner help!

[XeHacks]

i have downloaded jrunner and now everytime i try to read nand or anything it goes to
Wrong Arm Version.
Can not continue
Programming Coolrunner
Wrong Arm Version.


Any help!?

 

[Krafter]

You don't have a SPI programmer compatible with J-Runner. If it's a NAND-X, it can be updated to work. If it's something other then...... good luck on that. You will not be able to use J-Runner to read/write your nand if that is the case.

 

[XeHacks]

i took a brake from jtagging and stuff but i have jtag tool and it says wrong arm version for nandpro any help??

 

[Krafter]

I'd suggest using nandpro 2.0e or find an older version of JTAG Tool.

 

[BL4K3Y]

You need a NAND-X running V3 ARM firmware to be able to read/write using J-Runner.

 

[XeHacks]

im not going to be using j runner im going to use jtag tool now and it still has the error

 

[Krafter]

See post #4.....