RGH Jrunner won't let me create ECC

S

siblckr

Junior Member
Mar 13, 2012
14
0
Thanks for reading guys.

Yesterday I soldered my JProgrammer wires, successfully read and compared the NAND. Then I programmed the Coolrunner but as it was late i called it a day, and put my computer to sleep with Jrunner still as it was.

Today i've soldered the Coolrunner and gone to Create the ECC but now the option is not clickable. See attached screen shot.

This is most probably because I didn't do it all in one go, but how to I get back on track now? Do I need to read and compare the NAND again?

Screen Shot 2013-12-18 at 12.31.46.png

Here's my log too:

===================================================
Wednesday, December 18, 2013 2:21:43 AM


J-Runner v0.3 Beta (4) Started






Checking Files
Finished Checking Files
Trinity Manually Selected
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\Simon\Downloads\XBOX 360\J-Runner\output\nanddump1.bin
Reading Nand
Done!
in 3:43 min:sec


Reading Nand to C:\Users\Simon\Downloads\XBOX 360\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
RGH2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:43 min:sec


Comparing...
Nands are the same
Programming Coolrunner
C:\Users\Simon\Downloads\XBOX 360\J-Runner\common\xsvf\trinity.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: C:\Users\Simon\Downloads\XBOX 360\J-Runner\common\xsvf\trinity.xsvf
Sending Out Packets .........
Success
 
S

siblckr

Junior Member
Mar 13, 2012
14
0
Yes the NAND reads perfectly, and see attached pics.

I know the yellow NAND wire looks weirdly soldered but like I say it reads fine. I had real trouble with that one for some reason, Plus is my first soldering job :)

I just need to know though if I need to start the NAND reading process again to Create the ECC or is there something I click in Jrunner to jump back to that part.








Sent from my iPhone using Tapatalk
 
B

besty

VIP Member
Jan 30, 2012
263
0
siblckr said:
Yes the NAND reads perfectly, and see attached pics.

I know the yellow NAND wire looks weirdly soldered but like I say it reads fine. I had real trouble with that one for some reason, Plus is my first soldering job :)

I just need to know though if I need to start the NAND reading process again to Create the ECC or is there something I click in Jrunner to jump back to that part.








Sent from my iPhone using Tapatalk
Click to expand...
Have you programmed the coolrunner >
 
S

siblckr

Junior Member
Mar 13, 2012
14
0
Yes its been programmed. Literally my next step is to create the ECC, but I cannot select the option. Which i think is because my computer has been to sleep since i read the read the NAND/programmed the CR.

I haven't written the ECC yet so i've not got to the step where i get my keys.
 
B

besty

VIP Member
Jan 30, 2012
263
0
All need to do is load dump nand click on rgh and then click on ecc and load it >
 
Ben c

Ben c

Senior Member
Nov 14, 2013
120
0
portsmouth UK
You need to select rgh2 on the right side of the j-runner screen, the part you decided to leave out of your screenshot..
 
S

siblckr

Junior Member
Mar 13, 2012
14
0
Screen Shot 2013-12-18 at 13.53.08.png

Ok, so i've got Jrunner to give me the option to Create ECC again, but after a second of clicking it all it says is ECC created.

What I've seen on tutorial videos is that it should be a 10sec+ process with a more detailed log of what its doing?

Something doesn't seem right here.
 
Last edited:
Ben c

Ben c

Senior Member
Nov 14, 2013
120
0
portsmouth UK
Your confusing the ecc with the rgh nand, providing youve selected rgh2, the correct console version go ahead and write the ecc.disconnect J-R programmer from xbox, Remember to boot with eject not power button and wait for the christmas lights on the ROL board. If you dont have the dvd drive in your power button will constantly flash. Do not confuse this with the CR debug light.
 
keil423

keil423

VIP Member
Apr 4, 2011
1,954
88
South Dakota, USA
www.epicconsole.com
You also shouldn't get Christmas lights either. Christmas lights mean alternating red and green lights on the rol. This would indicate a bad NAND flash or something of that nature. Christmas lights bad.

You will just have normal green lights except the power light will be flashing if you don't plug in the DVD drive.
 
S

siblckr

Junior Member
Mar 13, 2012
14
0
All sorted guys!! Thank you very much for your help!!

I just got a bit confused as video tutorials use older versions of Jrunner so some of the options have changed and don't match what I have.

Pretty smooth sailing for my first glitch though!! And I've got an instant glitch!!





Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.