jtag and nand x
- Thread starter christom31
- Start date
- Jun 4, 2010
- 3,080
- 0
I wouldn't advise you to do this, it probably won't work and if the console stopped working then your pretty much %£%£3 as you don't even have a NAND-X or any other method of writing to the NAND.
Try compiling another copy of freeboot using your dumped XBR & CPU key again first.
Try compiling another copy of freeboot using your dumped XBR & CPU key again first.
i tried redumping my nand again and i still get the same error when compiling. i noticted when i was using flash 360 i seen that it sasy xexon 16mb nad on the screen? is that my motherboard or the version of the program causue i believe i have a flacon. also i have have two other 360s one is used for xbox live and another that i used to just play backups before i bought a jtag. is there any wany to dump the nand from either one of them without jtaging it?
i also tried to read my ky vault and when i get it in the log there is nothing there no keys just two lines on the notepad.
i also tried to read my ky vault and when i get it in the log there is nothing there no keys just two lines on the notepad.
Last edited:
rocket8080
BANNED
Ok so I have an exeon now I still can't get it to make a bin of my dump. There's gotta be something wrong
hello i got it working i am on dash 9199. now my other problem is updating to fsd 2.0 and dash launch with the ping patch removel. any help with that.
rocket8080
BANNED
You install fsd 2.0 just like installing fsd 1.08. I just kept a copy of the config.xml and replaced the one in fsd2.0 Do you have the freestyle folder on the ms hdd or on your external drive?Assuming that you have your freestyle folder on the root of a MS hdd then follow this,
unrar the dashlaunch v2.01 rar and grab the installer folder and place on a usb stick, not on the root of your hdd. Then make sure that your freestyle folder is on the root of your hdd and that the xex inside is named default. If so use this for your launch.ini file
[QuickLaunchButtons]
BUT_A =
BUT_B =
BUT_X =
BUT_Y =
Default = Hdd:\Freestyle\default.xex
[Settings]
Then place this launch.ini on the root of your hdd.
Insert your usb stick and launch the default.xex inside the installer folder with xexmenu. Follow the onscreen prompts
press a to install dashlaunch
This will write the launch.xex and the ihelper.xex to the flash.
press a to update. This will update the launch.ini found on the root of the hard drive.
It will then ask you to change the settings, press a to say yes and choose the setup you want. I choose yes to all the options execpt "do you want the console to freeze on fatal errors". Press a to shutdown.
Remove the usb stick and turn on your console. If it doesnt autoboot into fsd then check the launch.ini on the root of the hdd. you will have to copy it onto a usb stick and open it in notepad. The first time i tried this it didnt update my launch.ini file properly and it only showed the settings and not quicklaunchbuttons .
Theres no need to create a new freeboot image.
unrar the dashlaunch v2.01 rar and grab the installer folder and place on a usb stick, not on the root of your hdd. Then make sure that your freestyle folder is on the root of your hdd and that the xex inside is named default. If so use this for your launch.ini file
[QuickLaunchButtons]
BUT_A =
BUT_B =
BUT_X =
BUT_Y =
Default = Hdd:\Freestyle\default.xex
[Settings]
Then place this launch.ini on the root of your hdd.
Insert your usb stick and launch the default.xex inside the installer folder with xexmenu. Follow the onscreen prompts
press a to install dashlaunch
This will write the launch.xex and the ihelper.xex to the flash.
press a to update. This will update the launch.ini found on the root of the hard drive.
It will then ask you to change the settings, press a to say yes and choose the setup you want. I choose yes to all the options execpt "do you want the console to freeze on fatal errors". Press a to shutdown.
Remove the usb stick and turn on your console. If it doesnt autoboot into fsd then check the launch.ini on the root of the hdd. you will have to copy it onto a usb stick and open it in notepad. The first time i tried this it didnt update my launch.ini file properly and it only showed the settings and not quicklaunchbuttons .
Theres no need to create a new freeboot image.
Last edited:
hello thanks bro for the tut i will try it when i get home. umm doing this wont erase my external hard drive correct? should i back up my external hard drive just in case? can i over write the exsiting fsd or should i just delte it and reinstall the new one? also do i need to have my external hard drive partioned to put xblc on the external hard drive?
rocket8080
BANNED
No it wont erase your external drive, if your worried then just unplug for your own peace of mind. I would delete the current fsd and reinstall the new fsd 2.0, keep a copy of your config.xml though as it has all your paths.
I dont think so, tbh im not 100% sure as I dont use a external drive, I have a toshiba 750gb internal drive in the MS caddy.
i am running into a problem installing fsd alpha 2.0 uuuugggghhhh. i have it running but i can't connect to it through ftp. those directions are wrong casuse i can't ftp into my xbox when i am on fsd 2.0.
rocket8080
BANNED
Do you have fsd 2.0 autobooting now? And what ftp client are you using? Im using flashfxp with no problems.
They are the install instructions from the dashlaunch readme
I don't have it installed yet and it won't pick uo my games where do I out the feeestle folder? i am running it through xex loader. first thing on my dash is there is no ip address on the screen and my back button dont work to bring up a menu. i can't ftp into my dash while in fsd 2.0 some of the icons say disabled for alpha what does that mean? another thing is that it dont pick up my hard drive i can't use fsd indexer caseu i can't conect to the 360 under fsd2.0
Last edited:
rocket8080
BANNED
Put the freestyle folder and the launch.ini on the root of the Ms hdd.
You have to click in the right thumbstick to bring up the status bar on screen. This will give you the ip address. The back button no longer works on fsd 2.0.
The reason for this is as fsd2.0 is only a alpha release they have disabled some of the functions to allow it to run more stable.
Have you edited the paths in the fsd2config.xml?
Last edited:
rocket8080
BANNED
this is what my fsd2.config.xml looks like
i still get this working i can't believe it
<?xml version="1.0" encoding="utf-8"?>
<config>
<locale>en-US</locale>
<paths>Usb0.\launch.ini
<!-- Retail and devkit attributes are used to configure the tab on which
the title is displayed if it is a retail or devkit executable.
Options are: 360, HOMEBREW, EMULATOR and XBOX1 (can be left blank).
Example: <path retail='360' devkit='EMULATOR'>hdd1:\emulators</path> -->
</paths>retail='360'
<feeds>
</feeds>
<skin>Default.xzp</skin>
<Music Path='' MUST be in GAME:\ />
<Video Path='' />
<DVDCopy 360Path='' OrigPath=''/>
<weather location='undefined' />
<display horizoverscan='0' vertoverscan='0' horizdisplacement='0' vertdisplacement='0' letterbox='1'/>
<ftp xboxip='0.0.0.0' port='21' username='xbox' password='xbox' />
<gamelistopt background='1' preview='1' semitransparent='0' covers='0' />
<mainscreenopt tempstatus='1' diskstatus='1' celsius='1' parent='0' showip='1' showstatus='1' showavatar='1' />
<moreoptions fanspeed='40' ledformat='0' />
<timeformat time='0' date='0' ntponstartup='1' />
<autoupdater ondash='0' onskin='0' onplugin='0' onbeta='0' installer='0' />
<Version XEX='0' />
</config>
i still get this working i can't believe it
<?xml version="1.0" encoding="utf-8"?>
<config>
<locale>en-US</locale>
<paths>Usb0.\launch.ini
<!-- Retail and devkit attributes are used to configure the tab on which
the title is displayed if it is a retail or devkit executable.
Options are: 360, HOMEBREW, EMULATOR and XBOX1 (can be left blank).
Example: <path retail='360' devkit='EMULATOR'>hdd1:\emulators</path> -->
</paths>retail='360'
<feeds>
</feeds>
<skin>Default.xzp</skin>
<Music Path='' MUST be in GAME:\ />
<Video Path='' />
<DVDCopy 360Path='' OrigPath=''/>
<weather location='undefined' />
<display horizoverscan='0' vertoverscan='0' horizdisplacement='0' vertdisplacement='0' letterbox='1'/>
<ftp xboxip='0.0.0.0' port='21' username='xbox' password='xbox' />
<gamelistopt background='1' preview='1' semitransparent='0' covers='0' />
<mainscreenopt tempstatus='1' diskstatus='1' celsius='1' parent='0' showip='1' showstatus='1' showavatar='1' />
<moreoptions fanspeed='40' ledformat='0' />
<timeformat time='0' date='0' ntponstartup='1' />
<autoupdater ondash='0' onskin='0' onplugin='0' onbeta='0' installer='0' />
<Version XEX='0' />
</config>
rocket8080
BANNED
Youve not enter your paths in the fsd2config file properly. Try using this one below, this will allow your hdd to be detected.
Make sure your launch.ini file on the root of the internal hdd has the correct path.
Also look inside the freestyle folder and make sure that the xex inside is called default.xex and not freestyle.xex In the FSD2 Alpha Upd1.2 rar its called default.xex, as all updates will be in the future. The release before its called freestyle.xex
Last edited:
ok thank you moving right along. it has now picked up my games thank you thank you thank you so much. next step is dash launch. hwo do i install that? i did the installer through usb and it still dont work.