Jtag chips needed with RGH?

[spazfishy]

Hello, I soldered all four boards that came with the nand-x to my Zephyr mainboard. I am using the coolrrunner to perform rgh. I now wonder if the bottom two boards were even needed or if they will mess anything up.

Please advise, my system fans are running full speed and I am trying to find the cause.

---------- Post added at 06:20 ---------- Previous post was at 06:19 ----------

The chips in question are J2D2 and J1F1. Can they be removed without harming the box if they are not needed to preform rgh?

Thanks

 

[ball00]

OK for standard jtag only 2 of the qsb's in the pack should be soldered to the board. RGH only needs one of them and a seperate qsb sold seperately.

God knows how you got all 4 on but would love to see install pics. Usually you need the qsb for the rgh which is not sold with the nand x but is a seperate purchase and tyhe j1d2 board that you got with your kit. No other boards are needed.

If you have already performed the rgh then I know multibuilder turns the fan speeds up by default so this may be the problem.

See this thread for install pics and descriptions. http://team-xecuter.com/forums/showthread.php?t=74857

 

[spazfishy]

That's what I was thinking.. I was confident enough that was correct I just removed them. Now I will see if it still works after removing them. Sorry I could not provide pics first but the rgh was surely successful. I suppose that is why my fans are so loud now too.

Here's to hoping it turns back on after removing them.

Thanks for the quick answer.