Hello,
I have no led on coolrunner, all wires and solder points look ok, apart from this nand - x , the solder seem to of came away so i pull it off, is this why there is no power to the coolrunner board, i did not install it so not to sure, do i need to just get this board resoldered for it to work again?
http://postimg.org/image/c96zxuzzb/
I dont know what jtag version is or nothing as havent switched it on for a long time :S
TX Product(s) used: TX - Coolrunner Rev C?
Console Type: Falcon
NAND size: 16/256/512/4GB ( I Dont know)?
Dashboard version: ( i dont know i can get it on)?
CB version: I dont know
Screenshot of NAND details from J-Runner:
I dont know how
J-Runner log: I dont know
updflash.bin log (if applicable):
Image of Coolrunner: Cant do till tomorrow
Images of close-up soldering to motherboard: Cant do till tomorrow
(attach images to your post)
Description of problem: No power on the coolrunner
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: N
How long is the light on for each time: No lights
(be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).
Maybe i should wait and edit tomorrow with pictures of the soldering and the board.
I bought the console from someone else and never had problems. All i want to know is if having that nand -x not on is that why its not powering up?
History:
Xbox that devloped a damaged DVD drive. Drive removed and coolrunner board installed. FSD installed.
All that he told me, i cant get rest without being able to power on the xbox. But i will defiently take it apart tomorrow and take Good pictures of the coolrunner and soldering, thanks
I have no led on coolrunner, all wires and solder points look ok, apart from this nand - x , the solder seem to of came away so i pull it off, is this why there is no power to the coolrunner board, i did not install it so not to sure, do i need to just get this board resoldered for it to work again?
http://postimg.org/image/c96zxuzzb/
I dont know what jtag version is or nothing as havent switched it on for a long time :S
TX Product(s) used: TX - Coolrunner Rev C?
Console Type: Falcon
NAND size: 16/256/512/4GB ( I Dont know)?
Dashboard version: ( i dont know i can get it on)?
CB version: I dont know
Screenshot of NAND details from J-Runner:
I dont know how
J-Runner log: I dont know
updflash.bin log (if applicable):
Image of Coolrunner: Cant do till tomorrow
Images of close-up soldering to motherboard: Cant do till tomorrow
(attach images to your post)
Description of problem: No power on the coolrunner
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: N
How long is the light on for each time: No lights
(be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).
Maybe i should wait and edit tomorrow with pictures of the soldering and the board.
I bought the console from someone else and never had problems. All i want to know is if having that nand -x not on is that why its not powering up?
History:
Xbox that devloped a damaged DVD drive. Drive removed and coolrunner board installed. FSD installed.
All that he told me, i cant get rest without being able to power on the xbox. But i will defiently take it apart tomorrow and take Good pictures of the coolrunner and soldering, thanks
Last edited:
