JTAG Jtag everything checked out but?

[wilar]

Xenon 7371 kernel
CB version 1888
Successfully had three good nand reads saved, no bad blocks
Flashed Xell
booted up with eject got blank screen & three reds
I used nandx qsb & jtg tool, composite video lead
Should I return to original nand & how do I do it,
All advice Gratefully received Thanks

 

[keil423]

do you have the jumper between points 4 and 7 on the j2d2?

 

[wilar]

Yes I have, do I take it off or switch it off

 

[keil423]

please post pics of your install. How long did it take to red ring on you? Are you using standard Def. A/V wires?

 

[wilar]

Sorry for delay had to sort out camera , red lights came on straight after starting up with eject,Normal nandx kit with cables, composite audio video lead

 

[Martin C]

What secondary error code are you getting?

 

[wilar]

Nothing just a blank screen

 

[diaboliq20]

Martin means on the ROL
hold sync and press eject 5 times - this will give a series of 4 sets of lights
1 light=1
2 lights=2
3 lights=3
4 lights=0

post the 4 digit code u get

 

[wilar]

It Won't start up now its dead !

 

[keil423]

Is the Power brick turning Red?

 

[wilar]

No it stays amber

 

[Martin C]

You could be shorting something on the southbridge. You might need to remove the QSBs using flux and a hot iron to check.