jtag fix plz help

[subzdarg]

I tried to flash the newest freeboot to my jtag and something went wrong as I just get RRoD. It doesn't boot Xell either.
I also tried to flash my original nand using my LPT cable and still no luck. And could someone post the links to the software I would need to fix it.

 

[manwithoutname]

What's the secondary error code for the RROD?

 

[subzdarg]

0022

 

[WNYConsoles]

0022 is more than likely a bad nand since it happened right after the update.

Just to confirm, this is a JTAG and not a RGH (CoolRunner), correct? If this is a JTAG please send me your original NAND to the e-mail in my signature or upload it somewhere along with your CPU Key.

 

[manwithoutname]

I got a feeling you compiled your freeboot image with the wrong smc config. What motherboard type it is using the old traditional Jtag method or the new RGH?

Also what options exactly did you choose when you created the freeboot image before flashing? Last did you do the initial jtag yourself or someone else done it for you?

 

[subzdarg]

http://www.mediafire.com/?rbcqcy3i111h42r yes it the old style jtag some one made it for me its a xenon cpu is in there to have flash it befor but this is the first time this has happend
thanks 4 ur help

 

[WNYConsoles]

Flash nandflash.bin in the download link below using your LPT cable.

Nandpro Command: nandpro lpt: -w16 nandflash.bin

Download - http://wnyconsoleservices.com/Subzdarg_Xenon_NAND.zip

 

[manwithoutname]

SMC config looks fine. So it's not that . . .

 

[subzdarg]

Flash nandflash.bin in the download link below using your LPT cable.

Nandpro Command: nandpro lpt: -w16 nandflash.bin

Download - http://wnyconsoleservices.com/Subzdarg_Xenon_NAND.zip

thanks will flash this now an let u no

 

[subzdarg]

sorry sorted it now its flashing let u no fingers crossed

 

[garageinc]

if you have jungle flasher rob it from there and put it in the nandpro folder

 

[BL4K3Y]

NandPro just says DIPORTIO was not found were can i get this plz sorry to be a noob

You can get it here.

Simply drop the DLL in the NandPro folder and away you go .

if you have jungle flasher rob it from there and put it in the nandpro folder

That is libusb0.dll you are thinking of .

 

[subzdarg]

any one no the prob its still flashing but this could be my prob i duno

 

[WNYConsoles]

Could be soldering, maybe.

Did you take a nand dump via Xell prior to flashing the nand?
If so, did you create the FB with the Xell dump or with your original NAND?

 

[subzdarg]

em i dont no i did not make this never had probs flashing it befor
It can't be faulty soldering. I tried flashing my original nand the other day and it got to 3FF without any errors. Not sure if it's worth mentioning but my nand is a donor nand.
*And the donor nand worked in the past whilst updating.

 

[WNYConsoles]

This current flash is likely not going to work, but let it continue and see. Double check LPT soldering. Try the nand below if the current flash doesn't work.

http://wnyconsoleservices.com/Subzdarg_Xenon_NAND2.zip

NANDPRO - nandpro lpt: -w16 nandflash2.bin

 

[subzdarg]

ok what is diffrent about this nand tho and tbh the soldering look fine

 

[Martin C]

This is why we offer NO support for LPT flashing.

Get a proper USB SPI flasher or just flash Xellous over and flash from there.

 

[WNYConsoles]

ERRRR. Why didn't I think of flashing with Xell, been up all night working, slipped my mind.

However, for now, just flash the nandflash2.bin and see how it goes. If you start seeing a bunch of errors like before just cancel it.

 

[subzdarg]

how can i flash xell with nandpro an were can i get it an now my pc cashed an xbox wont power arrrrrrhhhhhhh